Kingdom T-Wrecks Available on Hasbro Pulse UK
Tuesday, June 15th, 2021 3:04PM CDT
Categories: Toy News, CollectablesPosted by: Bounti76 Views: 59,895
Topic Options: View Discussion · Sign in or Join to reply
This is good news for U.K. residents, as they now have access to this anticipated figure. Click on any picture above to be taken to his U.K. listing! He's due to be dispatched on September 1st this year, so just near the end of the summer. Good luck, U.K. fans!
News Search
Got Transformers News? Let us know here!
Most Popular Transformers News
Most Recent Transformers News
Posted by william-james88 on June 15th, 2021 @ 3:20pm CDT
Autobot N wrote:For me, it's Blaster, Slammer, and Pipes, in that orderwilliam-james88 wrote:Of the toys yet to be shown for Kingdom, which are you most excited to see? For me, it's Tigatron, really curious to see how he turned out.
Man, sometimes I lose sight of things, how is Blaster coming within the kingdom line?
Posted by Autobot N on June 15th, 2021 @ 3:38pm CDT
There were some leaked listings a month or so ago with a Kingdom Voyager Blaster. A couple of leakers said afterwards that some of the next trilogy's figures were being shuffled into a Kingdom Wave 5 a la Siege and Earthrise, but I don't remember if there were any others besides Blaster.william-james88 wrote:Autobot N wrote:For me, it's Blaster, Slammer, and Pipes, in that orderwilliam-james88 wrote:Of the toys yet to be shown for Kingdom, which are you most excited to see? For me, it's Tigatron, really curious to see how he turned out.
Man, sometimes I lose sight of things, how is Blaster coming within the kingdom line?
Posted by DeathReviews on June 15th, 2021 @ 4:07pm CDT
Posted by o.supreme on June 15th, 2021 @ 4:15pm CDT
DeathReviews wrote:Not sure I understand the appeal for this one.
basically those who remember the toy from 2000, as he was portrayed in fiction as the leader of the Beast Machines Maximal/Dinobots Sub-Group
https://tfwiki.net/wiki/Dinobot_(BM)
Oddly enough, I recall that Magmatron was an exclusive to Target at that time, but I think the original T-Wrecks was regular retail correct? - He was the only one I never wanted. I wanted all the others because it was a less expensive way to get several of the BW Neo Destrons' (albeit colored different)
Posted by Sabrblade on June 15th, 2021 @ 4:46pm CDT
There is no head retooling. There was supposed to be, but Hasbro goofed and used the same head as Megatron instead of the new one they made for T-Wrecks. As such, this is a straight redeco.DeathReviews wrote:Not sure I understand the appeal for this one. Different colors and a slight head remolding hardly seems to make this figure worth all the anticipation. Sure we all love tyrannosaurs, but they're treating T-Wrecks with as much buzz as if they were making the Centurion Drone accessories pack available again.....
As for why all the fuss, T-Wrecks is the redeco of the original BW Megatron toy. It was made back in 2000, so as soon as the new Kingdom Megatron was announced, people were expecting the inevitable T-Wrecks redeco.
Posted by Nemesis Primal on June 15th, 2021 @ 9:20pm CDT
I believe he also mentioned Slammer's tank cannon being able to be arm-mounted in robot mode like a Megatron fusion cannon, which would be absolutely impossible for the Warpath mold.Autobot N wrote:I dunno, the leaks were pretty specific. The guy in question leaked Slammer before the Walmart listing (I think he got to look at the instructions), and specifically called out his status as a Weaponizer and the fact that he had some sort of cool chainsaw/shield weapon. In particular:Bounti76 wrote:I think it's more likely that Slammer will be a redeco of Warpath, probably with a new head. Treds is the only other easy use of the mold that I can think of, but he's likely to be a Selects figure, if at all.Re - Slammer: I thought the same [reference to him potentially being a Warpath retool] til I saw his engineering prototype pics, he looks very different almost more like airwave.
I'm picking him up for his cool chainsaw tank tread shield weapon alone.Slammer:
Not super interested in this one, but he looks much more accurate than I expected. Appears to be almost completely a new mold. No obvious signs of shared engineering with Warpath, apart from the fact they both have treads and are tanks.
Posted by Triggerdick Megatron on June 16th, 2021 @ 1:57am CDT
o.supreme wrote:blackeyedprime wrote:Tigatron might have made it, if Cheetor was any good.
Surprisingly, Tigatron is a Voyager instead of a Deluxe, so it will be a new mold, not a remold of Cheetor.
Oh that sounds good....
I wish Kingdom Scorponok was a voyager, that size suits him.
Posted by Jelze Bunnycat on June 16th, 2021 @ 11:36am CDT
o.supreme wrote:DeathReviews wrote:Not sure I understand the appeal for this one.
basically those who remember the toy from 2000, as he was portrayed in fiction as the leader of the Beast Machines Maximal/Dinobots Sub-Group
https://tfwiki.net/wiki/Dinobot_(BM)
Oddly enough, I recall that Magmatron was an exclusive to Target at that time, but I think the original T-Wrecks was regular retail correct? - He was the only one I never wanted. I wanted all the others because it was a less expensive way to get several of the BW Neo Destrons' (albeit colored different)
T-Wrecks was regular retail, yes. The BM Dinobots were shipped mixed with the regular BM figures; T-Wrecks' case mate was Ultra Jetstorm.
:EDIT: Weird, I found a little... quirk with Paleotrex, specifically the Dino feet: they were misassembled on mine. Kinda hard to tell, but the detailing didn't really match up with what's on the Instructions (the part glossary for the Weapon Modes), turns out the shins were switched going by the curvature of the knees.
Posted by Sentinel_Primal on June 16th, 2021 @ 10:32pm CDT
Posted by william-james88 on June 16th, 2021 @ 11:41pm CDT
Posted by TF-fan kev777 on June 17th, 2021 @ 7:18am CDT
william-james88 wrote:Man, so glad I chose to skip this Rhinox and just stick to my T30 one
I'm the opposite, I can't wait to find this one. My T-30 Rhinox is a floppy mess that can only stand up in the most basic of poses.
Posted by Immortal Starscream on June 17th, 2021 @ 8:20am CDT
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
Posted by aronjlove on June 17th, 2021 @ 12:17pm CDT
So these are the bad shoulders? Just delivered by BBTS and they have shipped a lot of Galvatron figures with bad shoulders. I will probably try hunting for the fixed variant to swap since I don't trust myself doing the fixImmortal Starscream wrote:Just snagged Galvatron at my local Target yesterday. After having him in hand, I can say he is easily one of the best main line Transformers ever. He is surprisingly weighty too. Like, he feels the same weight as the 86 Grimlock despite being much shorter.
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
Posted by sol magnus on June 17th, 2021 @ 12:19pm CDT
aronjlove wrote:So these are the bad shoulders? Just delivered by BBTS and they have shipped a lot of Galvatron figures with bad shoulders. I will probably try hunting for the fixed variant to swap since I don't trust myself doing the fixImmortal Starscream wrote:Just snagged Galvatron at my local Target yesterday. After having him in hand, I can say he is easily one of the best main line Transformers ever. He is surprisingly weighty too. Like, he feels the same weight as the 86 Grimlock despite being much shorter.
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
IF they even fix it.
Posted by aronjlove on June 17th, 2021 @ 12:37pm CDT
sol magnus wrote:aronjlove wrote:So these are the bad shoulders? Just delivered by BBTS and they have shipped a lot of Galvatron figures with bad shoulders. I will probably try hunting for the fixed variant to swap since I don't trust myself doing the fixImmortal Starscream wrote:Just snagged Galvatron at my local Target yesterday. After having him in hand, I can say he is easily one of the best main line Transformers ever. He is surprisingly weighty too. Like, he feels the same weight as the 86 Grimlock despite being much shorter.
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
IF they even fix it.
Yeah, I'll just sit on the figure for a bit and see what I can find locally. One Target yesterday had tons of Rhinox and Cyclonus so they put out voyagers but the deluxe and leaders were older stuff, going to check the other major Target near me after work. I've seen reports of fixed variants being found in the wild so something must have been done.
Posted by Immortal Starscream on June 17th, 2021 @ 12:53pm CDT
aronjlove wrote:sol magnus wrote:aronjlove wrote:So these are the bad shoulders? Just delivered by BBTS and they have shipped a lot of Galvatron figures with bad shoulders. I will probably try hunting for the fixed variant to swap since I don't trust myself doing the fixImmortal Starscream wrote:Just snagged Galvatron at my local Target yesterday. After having him in hand, I can say he is easily one of the best main line Transformers ever. He is surprisingly weighty too. Like, he feels the same weight as the 86 Grimlock despite being much shorter.
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
IF they even fix it.
Yeah, I'll just sit on the figure for a bit and see what I can find locally. One Target yesterday had tons of Rhinox and Cyclonus so they put out voyagers but the deluxe and leaders were older stuff, going to check the other major Target near me after work. I've seen reports of fixed variants being found in the wild so something must have been done.
I have seen reports of people finding fixed shoulders in the wild. however these could be factory "mistakes" were the mistake is accidentally the correct version!
I will say I do advise SERIOUS caution if you are thinking about doing the fix, because breakage is highly likely. Japanese toy reviewer Wotafa did a livestream where he does the fix. It is easy to see how to do it even though it is in Japanese.
honestly though if you freak out at the sight of toys getting treated dangerously, look away!
https://youtu.be/qbjSCHHTGl4
Posted by aronjlove on June 17th, 2021 @ 3:11pm CDT
Posted by sol magnus on June 17th, 2021 @ 3:16pm CDT
aronjlove wrote:I might actually try the fix. I've seen a few mutuals on Twitter do it and they've posted pics or vids. I hit my secondary Target and they had two Galvatron figures but both had the same shoulders as the one I received from BBTS today. I'm going to watch everything several times first, though, before I commit.
There's a post on a good fix, a couple pages back.
Posted by TF-fan kev777 on June 17th, 2021 @ 4:30pm CDT
sol magnus wrote:aronjlove wrote:I might actually try the fix. I've seen a few mutuals on Twitter do it and they've posted pics or vids. I hit my secondary Target and they had two Galvatron figures but both had the same shoulders as the one I received from BBTS today. I'm going to watch everything several times first, though, before I commit.
There's a post on a good fix, a couple pages back.
I watched the first half thinking no way in hell. The pin wasn't so bad, I was surprised how difficult it appeared just getting the arm off and on. Then seeing how scratched up the inside of the arm pieces got really turned me off. But then the tip to ditch the pin and replace it with a screw has almost convinced me to maybe give it a try.
Posted by sol magnus on June 17th, 2021 @ 4:50pm CDT
TF-fan kev777 wrote:sol magnus wrote:aronjlove wrote:I might actually try the fix. I've seen a few mutuals on Twitter do it and they've posted pics or vids. I hit my secondary Target and they had two Galvatron figures but both had the same shoulders as the one I received from BBTS today. I'm going to watch everything several times first, though, before I commit.
There's a post on a good fix, a couple pages back.
I watched the first half thinking no way in hell. The pin wasn't so bad, I was surprised how difficult it appeared just getting the arm off and on. Then seeing how scratched up the inside of the arm pieces got really turned me off. But then the tip to ditch the pin and replace it with a screw has almost convinced me to maybe give it a try.
I'm thinking the pin is just plain cheapear than a screw, because if it was a screw it would be easy peasy. A couple of scratches on an arm joint ain't gonna bother me, but misassembled shoulders might. We shall see.
Posted by aronjlove on June 17th, 2021 @ 4:59pm CDT
I thought the pin wouldn't bother me, but I know it is there so it sorta does. I doubt the low shoulder would bug me either if I didn't actually know it is low. But I do. And it does.sol magnus wrote:TF-fan kev777 wrote:sol magnus wrote:aronjlove wrote:I might actually try the fix. I've seen a few mutuals on Twitter do it and they've posted pics or vids. I hit my secondary Target and they had two Galvatron figures but both had the same shoulders as the one I received from BBTS today. I'm going to watch everything several times first, though, before I commit.
There's a post on a good fix, a couple pages back.
I watched the first half thinking no way in hell. The pin wasn't so bad, I was surprised how difficult it appeared just getting the arm off and on. Then seeing how scratched up the inside of the arm pieces got really turned me off. But then the tip to ditch the pin and replace it with a screw has almost convinced me to maybe give it a try.
I'm thinking the pin is just plain cheapear than a screw, because if it was a screw it would be easy peasy. A couple of scratches on an arm joint ain't gonna bother me, but misassembled shoulders might. We shall see.
Posted by Hellscream9999 on June 17th, 2021 @ 5:52pm CDT
Immortal Starscream wrote:Just snagged Galvatron at my local Target yesterday. After having him in hand, I can say he is easily one of the best main line Transformers ever. He is surprisingly weighty too. Like, he feels the same weight as the 86 Grimlock despite being much shorter.
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
Question, does the "broken" shoulder configuration affect the range of movement if you simply orient them so the pin head faces towards you?
Posted by TF-fan kev777 on June 17th, 2021 @ 5:53pm CDT
aronjlove wrote:I thought the pin wouldn't bother me, but I know it is there so it sorta does. I doubt the low shoulder would bug me either if I didn't actually know it is low. But I do. And it does.
I'm right there with you.
You down with OCD? Yeah you know me,
You down with OCD? Yeah you know me,
You down with OCD? Yeah you know me!
Posted by aronjlove on June 17th, 2021 @ 6:14pm CDT
Hellscream9999 wrote:Immortal Starscream wrote:Just snagged Galvatron at my local Target yesterday. After having him in hand, I can say he is easily one of the best main line Transformers ever. He is surprisingly weighty too. Like, he feels the same weight as the 86 Grimlock despite being much shorter.
The shoulders sitting low on him though, I can confirm it is because he is assembled wrong. the O-rings are upside down. I popped the pins out (I don't recommend, high chance of figure destruction) and the rings have sculpted detail on them that match the rest of the shoulder once flipped right side up. (see attached pics). Also going to do a review of the mad lad. Stay Tuned!
Question, does the "broken" shoulder configuration affect the range of movement if you simply orient them so the pin head faces towards you?
Absolutely not from what I can tell. I don't see any range of movement impeded. I just finished one arm and they can both move the same. Actually, if you don't do the 'fix', Galvatron has a higher reach. If your Galvatron plays basketball, you want the factory defect
TF-fan kev777 wrote:aronjlove wrote:I thought the pin wouldn't bother me, but I know it is there so it sorta does. I doubt the low shoulder would bug me either if I didn't actually know it is low. But I do. And it does.
I'm right there with you.
You down with OCD? Yeah you know me,
You down with OCD? Yeah you know me,
You down with OCD? Yeah you know me!
Lol, exactly!
Posted by chuckdawg1999 on June 17th, 2021 @ 6:15pm CDT
Posted by -Kanrabat- on June 17th, 2021 @ 6:32pm CDT
Maybe the issue will be fixed?
Posted by aronjlove on June 17th, 2021 @ 6:38pm CDT
chuckdawg1999 wrote:Is there any way to fix the arms on Galvatron just by rotating the joint around and swiveling the bicep? Do the "unfixed" arms affect transformation?
I haven't even transformed him yet but since all we are doing is flipping that shoulder piece, you can do exactly what you say but then the pin-hole shows. So it depends on how much that will bother you. Someone is gonna make an add-on that is nothing but covers for those pin-holes, they gonna make a lotta money.
Posted by sol magnus on June 17th, 2021 @ 7:29pm CDT
aronjlove wrote:I thought the pin wouldn't bother me, but I know it is there so it sorta does. I doubt the low shoulder would bug me either if I didn't actually know it is low. But I do. And it does.sol magnus wrote:TF-fan kev777 wrote:sol magnus wrote:aronjlove wrote:I might actually try the fix. I've seen a few mutuals on Twitter do it and they've posted pics or vids. I hit my secondary Target and they had two Galvatron figures but both had the same shoulders as the one I received from BBTS today. I'm going to watch everything several times first, though, before I commit.
There's a post on a good fix, a couple pages back.
I watched the first half thinking no way in hell. The pin wasn't so bad, I was surprised how difficult it appeared just getting the arm off and on. Then seeing how scratched up the inside of the arm pieces got really turned me off. But then the tip to ditch the pin and replace it with a screw has almost convinced me to maybe give it a try.
I'm thinking the pin is just plain cheapear than a screw, because if it was a screw it would be easy peasy. A couple of scratches on an arm joint ain't gonna bother me, but misassembled shoulders might. We shall see.
One misaligned is worse than both misaligned. It looks...bad.
Posted by aronjlove on June 17th, 2021 @ 8:00pm CDT
Posted by TF-fan kev777 on June 17th, 2021 @ 9:48pm CDT
In any case, I snagged a Rhinox and Galvatron that my wife will have my kids wrap for me for Sunday, so they can mock and torture me for a couple days before I can enjoy them.
I'm leaning towards doing the shoulder fix. Has anyone who has done it replaced the pins with screws? And if so, what size screws did you use?
Posted by Bounti76 on June 17th, 2021 @ 11:59pm CDT
From this picture, we can see that Red Alert will be based on the upcoming Amazon exclusive earth-mode Sideswipe. Like his regular mold mate, Red Alert will also be a store exclusive, to the Walgreens drugstore chain, at least in the U.S., like Siege Ratchet and Earthrise Bluestreak. It remains to be seen how his distribution outside the U.S. will he handled.
What do you think of this reveal? Excited to add another LamBro to your collection? Let us know your thoughts, and stay tuned to Seibertron for all the latest Transformers news!
Posted by Rodimus Prime on June 18th, 2021 @ 12:50am CDT
Posted by Sentinel_Primal on June 18th, 2021 @ 1:47am CDT
Posted by Gauntlet101010 on June 18th, 2021 @ 7:33am CDT
I don't know why I like Universe RA less than his mold mates. I have a replacement head for him so it's not that. Hopefully this is easy to get.
Posted by sol magnus on June 18th, 2021 @ 9:01am CDT
Posted by M. Spector on June 18th, 2021 @ 9:21am CDT
And as a side note, pretty much all of the walgreens exclusives have shown up here in the far north, the only one that hasn't isnt even a TF but a Silver Surfer Marvel Legends figure from a year or so ago
Posted by Wolfman Jake on June 18th, 2021 @ 9:27am CDT
I think Hasbro and Takara must have used the original MP-14 release of Red Alert, not the “anime colors” MP-14+ version, as their color guide for the Kingdom figure.
Posted by o.supreme on June 18th, 2021 @ 9:40am CDT
Posted by LunarBolt1984 on June 18th, 2021 @ 10:27am CDT
On another note, i never got SEIGE Red Alert, or Netflix Red Alert, so I'm gonna try and pick up this guy, even if I passed up on Inferno (already had Grapple). I was perfectly fine with the SEIGE Lambo mold, which is why I have both Sideswipe and Deep Cover, but I'll bite on this one if it becomes available here in Canada. Earth-mode is a decent enough slight retool to not make me think its HasTak laziness, so Red Alert will look fine with my other two Lambros.
Posted by Autobot_Benz on June 18th, 2021 @ 10:52am CDT
https://www.youtube.com/watch?v=z4hr8r6Nivk
I am sticking with my Thrilling 30's one
Posted by Sculyblast on June 18th, 2021 @ 11:47am CDT
I've always wanted a hippo brother for rhinox.
Posted by Razorbeast88 on June 18th, 2021 @ 11:52am CDT
Sculyblast wrote:I'm intrigued by the idea that I would only need to remove one pin to retool Rhinox into a hippo alt-mode.
I've always wanted a hippo brother for rhinox.
Big fan of your thought process
We need a hippo alt mode already! Those things are dangerous af
Hip hop anonymous
Posted by blackeyedprime on June 18th, 2021 @ 11:57am CDT
Posted by Overcracker on June 18th, 2021 @ 12:59pm CDT
Otherwise, its off to BBTS or TFsource and a steep markup.
Posted by Wolfman Jake on June 18th, 2021 @ 1:51pm CDT
Posted by o.supreme on June 18th, 2021 @ 2:14pm CDT
Wolfman Jake wrote:Is Galvatron’s wave mate Ultra Magnus?
I think so...If that is the case, then the Magnus I saw earlier this week at Target (the first leader in months), means I just missed Galvatron...go figure...
Posted by TF-fan kev777 on June 18th, 2021 @ 6:03pm CDT
o.supreme wrote:Wolfman Jake wrote:Is Galvatron’s wave mate Ultra Magnus?
I think so...If that is the case, then the Magnus I saw earlier this week at Target (the first leader in months), means I just missed Galvatron...go figure...
Yes he is, based on the 2 that were on the shelf when I found my Galvatron Thursday. That shelf was empty for a month.
Posted by aronjlove on June 18th, 2021 @ 10:37pm CDT
Posted by Rodimus Prime on June 18th, 2021 @ 10:41pm CDT
Mine has been empty for 3 months or more. But tonight I stopped in after work and lo and behold there were 3 Magni and 2 Galvatrons, with the bad shoulders (pins in the back?). I'm still not sold on Galvatron, but he looked better in hand than in photos. The crap on the chest still bothers me.TF-fan kev777 wrote:o.supreme wrote:Wolfman Jake wrote:Is Galvatron’s wave mate Ultra Magnus?
I think so...If that is the case, then the Magnus I saw earlier this week at Target (the first leader in months), means I just missed Galvatron...go figure...
Yes he is, based on the 2 that were on the shelf when I found my Galvatron Thursday. That shelf was empty for a month.
And I noticed the Commander Class slot on the shelf, so I asked the guy to scan it for me for a possible arrival date of the product. He said that the CC is being discontinued in the store, but I can get it online. I'm not sure if this is just regional or company-wide. My Wal-Mart did away with the CC slot after Jetfire, but I got Sky-Lynx at Target. Looks like Rodimus will be an online purchase, if I can get a deal for him.
Posted by ZeldaTheSwordsman on June 19th, 2021 @ 5:25am CDT
So every last bit of that premium engineering, all those features... All wasted because he's too short. He needed to be on par with Galvatron height-wise. No ifs, ands, or buts. The climactic throwdown scene makes that an absolute necessity, and they blew it. Even with as good as every last other aspect about him is, the height was make-or-break.
And it turns out, the answer was break.
I was so looking forward to him... I hadn't been that hyped for a Transformer in ages... But now because they screwed up that one single but oh-so-important thing....
I'm rather frustrated and bummed.... HasTak are unlikely to correct their obscene design failure at this point, and given how halfassed so many 3P upgrade kits are I don't dare hope for any worthwhile help from that quarter either.
He was going to be so good... But this one thing...
I just don't know what to do now.