Rumour: Transformers Bumblebee Movie Optimus Prime Studio Series Toy Leaked

steals_your_goats wrote:I have major mixed feelings about the studio Series as a whole. I'm no fan of the movies and most of the designs to me look like they threw a can into a shredder and called it a robot. But I decided to give the line a try because I don't like slagging things off without at least trying them and I've been met with mostly disappoinment. Stinger's shoulder pad snapped off, ratchet is a loose mess with panels that won't stay tabbed, you literally can't transform the first bumblebee or crowbar without half of it's bits falling off, blackout is a clumsy mess with an alt mode that doesn't hold together, Jazz's alt mold can't peg together properly, I can't transform the Volkswagen bumblebee because the headlights are fused in place, and Dropkick is just overall dreadful. I haven't been collecting seriously long (I mainly started in combiner Wars) but I've collected nearly every single figure to come out of the prime wars trilogy and I haven't had this many problems with any of those lines.

So now here's where the mixed feelings come in, I WANT this line to be good. While I don't like the movies or the designs really, the movies are pretty important to me. I'm 24 so I didn't grow up with G1 and no one in my family or even my friends like Transformers so the live action movies was the first experience I had with this fandom. It got me interested in the mythos of the whole brand which eventually lead to my discovery, and love, of the G1 continuity. So I

want to have a representation of this introduction on my shelves and the fact that I've just been met with disappointment so far is really disheartening. I think the new WW2 Bumblebee looks good but the fact that it's a total shell former kind of ruins it. I think sideswipe and barricade look great but seeing as all but 2 of the figures I've collected from this line have alt mode issues it makes me majorly question whether or not I want to keep up with the line.

This new Optimus might be the make or break for me. I really like the new design but if it turns out to have another bad alt mode then I think I'll have to call it quits on the Studio Series.

What's Crackin'? wrote:

steals_your_goats wrote:I have major mixed feelings about the studio Series as a whole. I'm no fan of the movies and most of the designs to me look like they threw a can into a shredder and called it a robot. But I decided to give the line a try because I don't like slagging things off without at least trying them and I've been met with mostly disappoinment. Stinger's shoulder pad snapped off, ratchet is a loose mess with panels that won't stay tabbed, you literally can't transform the first bumblebee or crowbar without half of it's bits falling off, blackout is a clumsy mess with an alt mode that doesn't hold together, Jazz's alt mold can't peg together properly, I can't transform the Volkswagen bumblebee because the headlights are fused in place, and Dropkick is just overall dreadful. I haven't been collecting seriously long (I mainly started in combiner Wars) but I've collected nearly every single figure to come out of the prime wars trilogy and I haven't had this many problems with any of those lines.

So now here's where the mixed feelings come in, I WANT this line to be good. While I don't like the movies or the designs really, the movies are pretty important to me. I'm 24 so I didn't grow up with G1 and no one in my family or even my friends like Transformers so the live action movies was the first experience I had with this fandom. It got me interested in the mythos of the whole brand which eventually lead to my discovery, and love, of the G1 continuity. So I

want to have a representation of this introduction on my shelves and the fact that I've just been met with disappointment so far is really disheartening. I think the new WW2 Bumblebee looks good but the fact that it's a total shell former kind of ruins it. I think sideswipe and barricade look great but seeing as all but 2 of the figures I've collected from this line have alt mode issues it makes me majorly question whether or not I want to keep up with the line.

This new Optimus might be the make or break for me. I really like the new design but if it turns out to have another bad alt mode then I think I'll have to call it quits on the Studio Series.

All of my studio series figures have turned out just fine. The worst experience I've ever had with one was that my Ironhide was missing his silver Autobot Symbol. That and I guess ratchets legs being a but loose. I can transform my 01 Bumblebee without stuff falling off. The back of the helicopter is the only reports we've had of Blackout not staying together, and the arms not tabbing in, which isn't a huge deal. Stinger breaking is most likely your fault, or you may have just gotten a bad copy.

I do have a fix for your Jazz though. The car mode can stick together just fine. The instructions neglect to mention that you're supposed to use the plug on the roof and plug it into the port on his bottom torso. It's where a figure stand is supposed to go. Just do this easy step, and you should be good to go.

steals_your_goats wrote:

What's Crackin'? wrote:

steals_your_goats wrote:I have major mixed feelings about the studio Series as a whole. I'm no fan of the movies and most of the designs to me look like they threw a can into a shredder and called it a robot. But I decided to give the line a try because I don't like slagging things off without at least trying them and I've been met with mostly disappoinment. Stinger's shoulder pad snapped off, ratchet is a loose mess with panels that won't stay tabbed, you literally can't transform the first bumblebee or crowbar without half of it's bits falling off, blackout is a clumsy mess with an alt mode that doesn't hold together, Jazz's alt mold can't peg together properly, I can't transform the Volkswagen bumblebee because the headlights are fused in place, and Dropkick is just overall dreadful. I haven't been collecting seriously long (I mainly started in combiner Wars) but I've collected nearly every single figure to come out of the prime wars trilogy and I haven't had this many problems with any of those lines.

So now here's where the mixed feelings come in, I WANT this line to be good. While I don't like the movies or the designs really, the movies are pretty important to me. I'm 24 so I didn't grow up with G1 and no one in my family or even my friends like Transformers so the live action movies was the first experience I had with this fandom. It got me interested in the mythos of the whole brand which eventually lead to my discovery, and love, of the G1 continuity. So I

want to have a representation of this introduction on my shelves and the fact that I've just been met with disappointment so far is really disheartening. I think the new WW2 Bumblebee looks good but the fact that it's a total shell former kind of ruins it. I think sideswipe and barricade look great but seeing as all but 2 of the figures I've collected from this line have alt mode issues it makes me majorly question whether or not I want to keep up with the line.

This new Optimus might be the make or break for me. I really like the new design but if it turns out to have another bad alt mode then I think I'll have to call it quits on the Studio Series.

All of my studio series figures have turned out just fine. The worst experience I've ever had with one was that my Ironhide was missing his silver Autobot Symbol. That and I guess ratchets legs being a but loose. I can transform my 01 Bumblebee without stuff falling off. The back of the helicopter is the only reports we've had of Blackout not staying together, and the arms not tabbing in, which isn't a huge deal. Stinger breaking is most likely your fault, or you may have just gotten a bad copy.

I do have a fix for your Jazz though. The car mode can stick together just fine. The instructions neglect to mention that you're supposed to use the plug on the roof and plug it into the port on his bottom torso. It's where a figure stand is supposed to go. Just do this easy step, and you should be good to go.

If you can transform that bumblebee without the hood falling off then you must be using kid gloves because I'm seems that literally everybody else has the issue. I've seen plenty of other people have issues with blackouts panels lining up but even if it's "not a huge deal" that's not the point. It shouldn't be an issue at all.

As for jazz, I honestly didn't know about that peg. I don't use instructions anyway but I just tried what you said and it worked great so thank you. Now I like jazz a bunch more.

steals_your_goats wrote:

What's Crackin'? wrote:

steals_your_goats wrote:I have major mixed feelings about the studio Series as a whole. I'm no fan of the movies and most of the designs to me look like they threw a can into a shredder and called it a robot. But I decided to give the line a try because I don't like slagging things off without at least trying them and I've been met with mostly disappoinment. Stinger's shoulder pad snapped off, ratchet is a loose mess with panels that won't stay tabbed, you literally can't transform the first bumblebee or crowbar without half of it's bits falling off, blackout is a clumsy mess with an alt mode that doesn't hold together, Jazz's alt mold can't peg together properly, I can't transform the Volkswagen bumblebee because the headlights are fused in place, and Dropkick is just overall dreadful. I haven't been collecting seriously long (I mainly started in combiner Wars) but I've collected nearly every single figure to come out of the prime wars trilogy and I haven't had this many problems with any of those lines.

So now here's where the mixed feelings come in, I WANT this line to be good. While I don't like the movies or the designs really, the movies are pretty important to me. I'm 24 so I didn't grow up with G1 and no one in my family or even my friends like Transformers so the live action movies was the first experience I had with this fandom. It got me interested in the mythos of the whole brand which eventually lead to my discovery, and love, of the G1 continuity. So I

want to have a representation of this introduction on my shelves and the fact that I've just been met with disappointment so far is really disheartening. I think the new WW2 Bumblebee looks good but the fact that it's a total shell former kind of ruins it. I think sideswipe and barricade look great but seeing as all but 2 of the figures I've collected from this line have alt mode issues it makes me majorly question whether or not I want to keep up with the line.

This new Optimus might be the make or break for me. I really like the new design but if it turns out to have another bad alt mode then I think I'll have to call it quits on the Studio Series.

All of my studio series figures have turned out just fine. The worst experience I've ever had with one was that my Ironhide was missing his silver Autobot Symbol. That and I guess ratchets legs being a but loose. I can transform my 01 Bumblebee without stuff falling off. The back of the helicopter is the only reports we've had of Blackout not staying together, and the arms not tabbing in, which isn't a huge deal. Stinger breaking is most likely your fault, or you may have just gotten a bad copy.

I do have a fix for your Jazz though. The car mode can stick together just fine. The instructions neglect to mention that you're supposed to use the plug on the roof and plug it into the port on his bottom torso. It's where a figure stand is supposed to go. Just do this easy step, and you should be good to go.

If you can transform that bumblebee without the hood falling off then you must be using kid gloves because I'm seems that literally everybody else has the issue. I've seen plenty of other people have issues with blackouts panels lining up but even if it's "not a huge deal" that's not the point. It shouldn't be an issue at all.

As for jazz, I honestly didn't know about that peg. I don't use instructions anyway but I just tried what you said and it worked great so thank you. Now I like jazz a bunch more.

What's Crackin'? wrote:

steals_your_goats wrote:

What's Crackin'? wrote:

steals_your_goats wrote:I have major mixed feelings about the studio Series as a whole. I'm no fan of the movies and most of the designs to me look like they threw a can into a shredder and called it a robot. But I decided to give the line a try because I don't like slagging things off without at least trying them and I've been met with mostly disappoinment. Stinger's shoulder pad snapped off, ratchet is a loose mess with panels that won't stay tabbed, you literally can't transform the first bumblebee or crowbar without half of it's bits falling off, blackout is a clumsy mess with an alt mode that doesn't hold together, Jazz's alt mold can't peg together properly, I can't transform the Volkswagen bumblebee because the headlights are fused in place, and Dropkick is just overall dreadful. I haven't been collecting seriously long (I mainly started in combiner Wars) but I've collected nearly every single figure to come out of the prime wars trilogy and I haven't had this many problems with any of those lines.

So now here's where the mixed feelings come in, I WANT this line to be good. While I don't like the movies or the designs really, the movies are pretty important to me. I'm 24 so I didn't grow up with G1 and no one in my family or even my friends like Transformers so the live action movies was the first experience I had with this fandom. It got me interested in the mythos of the whole brand which eventually lead to my discovery, and love, of the G1 continuity. So I

want to have a representation of this introduction on my shelves and the fact that I've just been met with disappointment so far is really disheartening. I think the new WW2 Bumblebee looks good but the fact that it's a total shell former kind of ruins it. I think sideswipe and barricade look great but seeing as all but 2 of the figures I've collected from this line have alt mode issues it makes me majorly question whether or not I want to keep up with the line.

This new Optimus might be the make or break for me. I really like the new design but if it turns out to have another bad alt mode then I think I'll have to call it quits on the Studio Series.

All of my studio series figures have turned out just fine. The worst experience I've ever had with one was that my Ironhide was missing his silver Autobot Symbol. That and I guess ratchets legs being a but loose. I can transform my 01 Bumblebee without stuff falling off. The back of the helicopter is the only reports we've had of Blackout not staying together, and the arms not tabbing in, which isn't a huge deal. Stinger breaking is most likely your fault, or you may have just gotten a bad copy.

I do have a fix for your Jazz though. The car mode can stick together just fine. The instructions neglect to mention that you're supposed to use the plug on the roof and plug it into the port on his bottom torso. It's where a figure stand is supposed to go. Just do this easy step, and you should be good to go.

If you can transform that bumblebee without the hood falling off then you must be using kid gloves because I'm seems that literally everybody else has the issue. I've seen plenty of other people have issues with blackouts panels lining up but even if it's "not a huge deal" that's not the point. It shouldn't be an issue at all.

As for jazz, I honestly didn't know about that peg. I don't use instructions anyway but I just tried what you said and it worked great so thank you. Now I like jazz a bunch more.

Glad I was able to help. Jazz is my personal favorite toy from the line. My 01 bumblebee has had the back pack fall off before. This issue is more prominent on the first release, but no I've never used kid gloves, I just take it nice and easy. I think hasbro learned not having one of those metal rods in the back was a mistake, because the Clunker Bee seems to have a rod holding the backpack together. Also yeah stuff not tabbing together shouldn't be an issue, but it is. Sometimes you need to sand stuff down, which could cause more harm than good. You shouldn't have to fix that either. My Ratchet always has had stuff tab in just fine. I have no idea how your SS 18 bumblebee has its headlights fused together, but I know they are stuck on pieces on the chest, which move in and out. If you can't move those pieces you should take it back to the store and get a new one.

What's Crackin'? wrote:Glad I was able to help. Jazz is my personal favorite toy from the line. My 01 bumblebee has had the back pack fall off before. This issue is more prominent on the first release, but no I've never used kid gloves, I just take it nice and easy. I think hasbro learned not having one of those metal rods in the back was a mistake, because the Clunker Bee seems to have a rod holding the backpack together. Also yeah stuff not tabbing together shouldn't be an issue, but it is. Sometimes you need to sand stuff down, which could cause more harm than good. You shouldn't have to fix that either. My Ratchet always has had stuff tab in just fine. I have no idea how your SS 18 bumblebee has its headlights fused together, but I know they are stuck on pieces on the chest, which move in and out. If you can't move those pieces you should take it back to the store and get a new one.

william-james88 wrote:FYI to everyone, this is not a fake. We knew from the listings that we were getting anoher voyager Optimus this year (along with a DOTM leader), we just didnt know from what movie he would be. Now we know. Also, thats so may damn optimus toys. 2 voyagers and 1 leader in Studio Series and a voyager and leader in Siege.

william-james88 wrote:FYI to everyone, this is not a fake. We knew from the listings that we were getting anoher voyager Optimus this year (along with a DOTM leader), we just didnt know from what movie he would be. Now we know. Also, thats so may damn optimus toys. 2 voyagers and 1 leader in Studio Series and a voyager and leader in Siege.

william-james88 wrote:We knew from the listings that we were getting anoher voyager Optimus this year (along with a DOTM leader)

SillyMcGilly wrote:

Carnivius_Prime wrote:

SillyMcGilly wrote:Bay has overstayed his welcome. TLK bombed, and for good reason. Stop acting like onetoy out of a movie where most of the main cast are new designs is the end of creativity as we know it.

I didn't say just one toy. I referred to all the G1 stuff in the movie and the IDW reboot just using all the boring new G1 siege toys rather than doing anything fresh and interesting.

Shatter and Dropkick and ESPECIALLY Blitzwing should be Bayish enough to suite your fancy, so that proves they wanna appeal to everyone.

What do you mean 'ESPECIALLY' Blitzwing? He was the most G1-ish of those three! Hell, everyone thought he was a G1-inspired Starscream for crying out loud... And that's not the point. If that movie is a prequel (like several elements of the plot and certain character designs suggest) then it's saying ALL the Transformers I've spent past 11 years collecting and admiring actually used to look like their G1 counterparts that I do not!

Stop taking it so **** personal, sheesh..

Yeah I should totally be quiet and have no complaints or voice my opinion at all. Like all those G1 fans did from 2007 to 2017. Yeah cos I sure never got a bashing from any of them when i expressed my love for the movie designs.

I like the movie designs too. At least.. Some of them. But sometimes "new" isn't NEW anymore. New to me is making a movie that actually brings the original cartoon's concepts to a cinematic form. We've had 5 movies of Bayhem and Bayformers since 2007 ffs. Sometimes old is the new new.

And about Blitzwing, he's the least G1 to me because he looks so different from his original design. That gas mask face is super sick though.

ZeroWolf wrote:

william-james88 wrote:FYI to everyone, this is not a fake. We knew from the listings that we were getting anoher voyager Optimus this year (along with a DOTM leader), we just didnt know from what movie he would be. Now we know. Also, thats so may damn optimus toys. 2 voyagers and 1 leader in Studio Series and a voyager and leader in Siege.

We knew there was another voyager prime? I knew of the dotm leader but I can't remember a listing explicitly saying voyager Optimus. I know there was the "hero" voyager which I said would be this version of Optimus.

Sabrblade wrote:There's no "Mc" in Travis Knight's name.

MadProject wrote:Found on Facebook, throught a friend of mine.
I don't know the original source.

SS38.jpg

ZeldaTheSwordsman wrote:

SillyMcGilly wrote:

Carnivius_Prime wrote:

SillyMcGilly wrote:Bay has overstayed his welcome. TLK bombed, and for good reason. Stop acting like onetoy out of a movie where most of the main cast are new designs is the end of creativity as we know it.

I didn't say just one toy. I referred to all the G1 stuff in the movie and the IDW reboot just using all the boring new G1 siege toys rather than doing anything fresh and interesting.

Shatter and Dropkick and ESPECIALLY Blitzwing should be Bayish enough to suite your fancy, so that proves they wanna appeal to everyone.

What do you mean 'ESPECIALLY' Blitzwing? He was the most G1-ish of those three! Hell, everyone thought he was a G1-inspired Starscream for crying out loud... And that's not the point. If that movie is a prequel (like several elements of the plot and certain character designs suggest) then it's saying ALL the Transformers I've spent past 11 years collecting and admiring actually used to look like their G1 counterparts that I do not!

Stop taking it so **** personal, sheesh..

Yeah I should totally be quiet and have no complaints or voice my opinion at all. Like all those G1 fans did from 2007 to 2017. Yeah cos I sure never got a bashing from any of them when i expressed my love for the movie designs.

I like the movie designs too. At least.. Some of them. But sometimes "new" isn't NEW anymore. New to me is making a movie that actually brings the original cartoon's concepts to a cinematic form. We've had 5 movies of Bayhem and Bayformers since 2007 ffs. Sometimes old is the new new.

And about Blitzwing, he's the least G1 to me because he looks so different from his original design. That gas mask face is super sick though.

The problem is that the movie universe is. NOT. G1. It could do with some more elements from G1 and other pre-movie continuities - like the Autobots providing disaster relief - but it is not G1 and never has been. It is its own thing. And furthermore, we've seen Cybertronian robot and vehicle modes, and flashbacks to the war! The GEEWUN designs from the Bumblebee movie are totally at odds with that. Travis Knight is being a buttheaded GEEWUNner who refuses to play by the movie universe's house rules. It's the equivalent of someone coming into your house and throwing out your furniture to replace it with something different because they don't like the look of it. Something being "new" does not automatically make it good, especially when it doesn't fit where it's been put. The way Knight's going I'm surprised he didn't have Megatron turn into a handgun (unless he did; I haven't seen the movie yet).
And what's your problem with TLK? That it *gasp* actually answered the question of what happened to Cybertron that had been hanging in the air since the end of DOTM? That it didn't have stupid cheatsy "Transformium" transformations?

Now me, I'm a big fan of both G1 AND the movies. But I think GEEWUNnery should be kept to G1-based lines and continuities while other universes get to be their own thing.

ZeldaTheSwordsman wrote:No, they weren't all identical. The Generic Decepticon Protoform Mooks were identical, yes (what else is new?), but there were still unique designs for non-generics. Like, say, MEGATRON. Or Soundwave's ROTF design. Or Shockwave in DOTM. Lockdown's goons and the Dinobots in AoE. The ancient knights and the Infernocons in TLK. Bottom line is, we have established Cybertronian robot and vehicle modes and they're the same BM Vehicon-ish alien look as earth-mode Bayformers, just even more alien because they don't have Earth-altmode kibble. Travis Knight IS being a GEEWUNNER by suddenly having the Cybertronian robot modes look like G1-but-with-more-tech-detailing instead of like the established movieverse aesthetic. Especially Ravage.

MadProject wrote:

SS38.jpg

hausjam wrote:You are saying we like garbage.

hausjam wrote:But I am not Optimistic.

hausjam wrote:Everyone who likes to call the transformers movies garbage films; you are garbage jerks. It's one thing to say you don't like a film. Even that you hated it. That's cool. No problem. But to call a movie garbage, a movie that many, many people thought was okay (even if they didn't love it) and that many, many people worked very hard to create, is to be a world class scumbag. You are saying we like garbage. And that's just an arrogant, horrible, sanctimonious thing to say. You are presuming you know what's best for everyone. You do not. And you never, ever will.

SillyMcGilly wrote:MAD-Project? The Transformers porn artist? o_o Wtf?

Cool toy, but still baffled that this guy reported this, lmao

ZeroWolf wrote:

SillyMcGilly wrote:MAD-Project? The Transformers porn artist? o_o Wtf?

Cool toy, but still baffled that this guy reported this, lmao

Wait... What?

SillyMcGilly wrote:

ZeroWolf wrote:

SillyMcGilly wrote:MAD-Project? The Transformers porn artist? o_o Wtf?

Cool toy, but still baffled that this guy reported this, lmao

Wait... What?

Search "MAD-Project Transformers Tumblr" on Google, and PM me what you come up with. Lmao

Sabrblade wrote:

hausjam wrote:You are saying we like garbage.

I'm fully aware that the two live action Flintstones movies are hot garbage and I still like them.

D-Maximal_Primal wrote:

SillyMcGilly wrote:

ZeroWolf wrote:

SillyMcGilly wrote:MAD-Project? The Transformers porn artist? o_o Wtf?

Cool toy, but still baffled that this guy reported this, lmao

Wait... What?

Search "MAD-Project Transformers Tumblr" on Google, and PM me what you come up with. Lmao

1st, no need for this here, and do not google this people.

2nd, you still have made no sense whatsoever. No one going by this username, heck no one even close to this username reported this.

ZeroWolf wrote:

D-Maximal_Primal wrote:

SillyMcGilly wrote:

ZeroWolf wrote:

SillyMcGilly wrote:MAD-Project? The Transformers porn artist? o_o Wtf?

Cool toy, but still baffled that this guy reported this, lmao

Wait... What?

Search "MAD-Project Transformers Tumblr" on Google, and PM me what you come up with. Lmao

1st, no need for this here, and do not google this people.

2nd, you still have made no sense whatsoever. No one going by this username, heck no one even close to this username reported this.

Don't worry, I won't be googling it my confusion was that it came out of nowhere as you said with 2/ unless I'm missing something or Silly knows something about who took the picture.

william-james88 wrote: We thank Seibertronian Mad Project for sending us the image below.