Transformers: Robots in Disguise Walmart Case Codes, Thermidor Revealed

The Bisk mold might actually look good in blue

But will it have a new head like Paralon, or will it be just another redeco like Scatterspike? That question remains to be determined.

Sabrblade wrote:But will it have a new head like Paralon, or will it be just another redeco like Scatterspike? That question remains to be determined.

Well Quillfire's head doesn't really seem like one that can be easily retooled since it was not attached with the stranded head ball joint peg most heads are but with those pins in the side holding his neck.


Not sure about Bisk since I don't own him but his pictures look like he has the standard head engineering.

Sabrblade wrote:But will it have a new head like Paralon, or will it be just another redeco like Scatterspike? That question remains to be determined.

I'm hoping for a new head. I like Thermidor's head design a lot more than Bisk's.

Deadput wrote:

Sabrblade wrote:But will it have a new head like Paralon, or will it be just another redeco like Scatterspike? That question remains to be determined.

Well Quillfire's head doesn't really seem like one that can be easily retooled since it was not attached with the stranded head ball joint peg most heads are but with those pins in the side holding his neck.


Not sure about Bisk since I don't own him but his pictures look like he has the standard head engineering.

Bisk is a standard head, yes.

william-james88 wrote:Bisk is a standard head, yes.

Alright thank you Will that means that Bisk is more likely to get a new head for Thermidor.

Deadput wrote:

william-james88 wrote:Bisk is a standard head, yes.

Alright thank you Will that means that Bisk is more likely to get a new head for Thermidor.

But not a guarantee. Paralon's head shouldn't really count as it's not show-accurate, and is probably a pretooled head the designers had some fun with.

Deadput wrote:

Sabrblade wrote:But will it have a new head like Paralon, or will it be just another redeco like Scatterspike? That question remains to be determined.

Well Quillfire's head doesn't really seem like one that can be easily retooled since it was not attached with the stranded head ball joint peg most heads are but with those pins in the side holding his neck.

The kind of joint that connects her head to her body shouldn't matter since the head itself is still a separate piece from the body. Certain attachment joints haven't stopped Hasbro from retooling parts (heads or otherwise) on other toys in the past. They just got lazy with Scatterspike or didn't have the budget to give her a new head.

JelZe GoldRabbit wrote:But not a guarantee. Paralon's head shouldn't really count as it's not show-accurate, and is probably a pretooled head the designers had some fun with.

Yes your right I know that which is why I did not say guaranteed.

Sabrblade wrote:The kind of joint that connects her head to her body shouldn't matter since the head itself is still a separate piece from the body. Certain attachment joints haven't stopped Hasbro from retooling parts (heads or otherwise) on other toys in the past. They just got lazy with Scatterspike or didn't have the budget to give her a new head.

The pins don't make it seem like Quillfire is a remold friendly figure at all too me so I still think that Hasbro went lazy as to not use a new technique for head remolding one specific head on a specific mold.

Not saying your wrong I'm just going with my opinion unless told by Hasbro themselves on the matter


I'm not in a very straight thinking mood so forgive any off sentences.

Found a warrior Blastwave at a local toys r us. I don't really follow RID but he looked cool. I love how he's a good guy Bludgeon and that head sculpt is incredible. It's figures like him though that make me wish RID had a voyager class.

steals_your_goats wrote:Found a warrior Blastwave at a local toys r us. I don't really follow RID but he looked cool. I love how he's a good guy Bludgeon and that head sculpt is incredible. It's figures like him though that make me wish RID had a voyager class.

You know, I bet if Fun Pub was still able to do Shattered Glass they'd give Bludgeon (already based on RID2001 Bludgeon) a shell that looks like RID2015 Blastwave.

Emerje

Bludgeon is one of those Warrior figures that for me falls under the category of "I love it so much but I wish it was Voyager". Another notable one for me being the Nemesis Prime redeco of Power Surge Optimus.

steals_your_goats wrote:Found a warrior Blastwave at a local toys r us. I don't really follow RID but he looked cool. I love how he's a good guy Bludgeon and that head sculpt is incredible. It's figures like him though that make me wish RID had a voyager class.

Wei Jiang have you covered - sort of.

http://www.seibertron.com/energonpub/chuck-s-reviews-transformers-robots-in-disguise-combiner-force-blastwave-t108451.php

Here's my review of Blastwave. I really like the mold, but I just can't get past the fact this is a blue Bludgeon. If they would've used the face one the card, it would've been a better figure.

In Italy, as some other countries in Europe, the 6th January sees the celebration of the Epiphany (if you're into sorta-religious celebrations, that is) and the end of winter festivities nation-wide. For the occasion, much like for Easter and other holidays, Hasbro has released a Befana - the Italian name of the day - themed Robots in Disguise stocking. Though I am not sure what is inside these, expect sweet treats and maybe a small toy, as is customary for the day, or a lump of coal if you've been bad!

Va'al wrote:Via fellow fansite Allspark.com's user NightViper, we have a list of upcoming Transformers: Robots in Disguise toys for the new year at Walmart. While some of the items included are re-packs of previous figures, such as Night Ops Bumblebee and Gold Armor/regular green Grimlock, we do have the new Blurr, Bludgeon and Twinferno figures - and an entirely new Thermidor one (though probably a redeco of Bisk)! Check it out below.

63050951129 Skywr (Skywarp)

63050951128 Blur(r)

63050955642 Bludgeo(n)

63050955641 Twinfrn (Twinferno)

63050955643 Thermid(or!)

63050926629 GRI (MLOCK, the original green one)

63050932499 ARMOR GR (Gold Armor Grimlock)

63050932500 NIGHT OPS (Bumblebee)

te heck wit dat repaint stuff

gimme my BUFFALOIDS

AND BAT AND FILCH AND PED AND SO ON

Found Doradus Legion Springload today, he's a marvelous little toy. Really little, but the mouth, arm articulation, and transformation scheme all make up for it. I do wish they didn't use black for the sides of the truck or the front grill. At least I can paint the front silver, make that look good. (when I stop obsessively transforming him, that is)

Ha! I found Springload and Starscream today too. At Target.
Haven't had time to open them yet, but if you like 'em Noidea, that makes even more excited to dig into Springload. I like your taste in Legions.

I think the Quillfire mold would make a great RID Terrorcon Blot figure!

JelZe GoldRabbit wrote:

Deadput wrote:

william-james88 wrote:Bisk is a standard head, yes.

Alright thank you Will that means that Bisk is more likely to get a new head for Thermidor.

But not a guarantee. Paralon's head shouldn't really count as it's not show-accurate, and is probably a pretooled head the designers had some fun with.

if i had to venture a guess, i'd say that Paralon's noodle was intended to approximate Beast Wars Scorponok. perhaps foreshadowing some manner of Platinum edition boxset?

Cybertron/10th ann Megatron
RID Paralon
Generations Waspinator
Uni 2 Dinobot

just need Tarantulas and Terrorsaur and we'll have a full Darksyde crew to go with our updated Axalon crew (gen Rhinox and Rattrap, Uni2 Cheetor, Cybertron/10th ann Primal (or MP))

Hasbro drops yet another TV ad on us today; but instead of Titans Returning, we get Combiners... forcing in the Robots in Disguise line; as they show off the crash combiners, the activators class and some rather impressive animation. Check it out embedded below!

The dust being thrown up around Prime looks terrific.

Can the ones that form upper bodies only form that or can they also turn into legs?

Those that become upper bodies can only be upper bodies, same for those that become legs

ebo716 wrote:Can the ones that form upper bodies only form that or can they also turn into legs?

they only form the upper bodies and the others only form the legs. But at least they each have their own robot modes.

NEW TRANSFORMERS COMBINER FORCE CRASH COMBINERS!!!!

And Activators.

Sabrblade wrote:NEW TRANSFORMERS COMBINER FORCE CRASH COMBINERS!!!!

And Activators.

It doesnt help that the gimick looked super weak in the ad. It's almost like nothing happened when he attached the smaller toy.

william-james88 wrote:

ebo716 wrote:Can the ones that form upper bodies only form that or can they also turn into legs?

they only form the upper bodies and the others only form the legs. But at least they each have their own robot modes.

No they don't, they really are just "shirts" and "pants". They're nothing more than glorified G1 Duocons

If you look at the 2:27 mark you can see the chap grabs a Sideswipe from the back of the stand in it's solo-robot mode.

Also if you look at the CGI mobile game models you can see the individual arms hanging off the models when they are combined. (especially on the jets)

I've also included the official Hasbro render of Storm hammer in their individual robot mode - check the rest of the images for some more.

So yep they do have 3 modes Either :

Vehicle/Robot & Upper Body
or
Vehicle/Robot & Lower body.

At least the kid remembered to flip the feet down. He's one up on the photographers.

RAR wrote:If you look at the 2:27 mark you can see the chap grabs a Sideswipe from the back of the stand in it's solo-robot mode.

Also if you look at the CGI mobile game models you can see the individual arms hanging off the models when they are combined. (especially on the jets)

I've also included the official Hasbro render of Storm hammer in their individual robot mode - check the rest of the images for some more.

So yep they do have 3 modes Either :

Vehicle/Robot & Upper Body
or
Vehicle/Robot & Lower body.

We know they have bot modes, the question was if they could form both the top and bottom halves of the combined mode which they can't.

Emerje

Emerje wrote:We know they have bot modes, the question was if they could form both the top and bottom halves of the combined mode which they can't.

Emerje

JelZe had just claimed otherwise in her previous post above. That's what RAR was responding to.

[quote="Emerje"
We know they have bot modes[/quote]
I don't think Jelze knows

william-james88 wrote:[quote="Emerje"
We know they have bot modes

I don't think Jelze knows[/quote]

I forgot, simply because the images for the smaller robot modes were smaller than the others and thus stood out less. I thus retract my statements and hide in shame

whoever did the cgi should be making a tf show. that would look great. it would take time. but it would look great.

I really don't mind the simplicity of the process. These toys are for kids, after all. And we all know Hasbro has been simplifying transformations over the last couple of years.

I didn't realize that there's a spring transformation component to the Crash Combiners. I'm really interested in them now.

We have a new sighting for you to check out today, this time in the form of a video showing that Combiner Force is hitting US retail! Youtuber Panda Prime Productions was kind enough to take this video from the local walmart, showing Combiner Force Beeswipe (Bumblebee and Sideswipe) And Prime Strong (Strongarm and Optimus Prime). In the video, it is shown that the figures appear to be going for around $9.84 per 2-pack, about the price of a 1-step changer. Now that you know they are hitting the shelves, go out and find yourselves some Combiner Force combiners!

I guess the window has passed on the Weaponizer Minicons. I'd love to know what happened.

rid new wave reviews

chuckdawg1999 wrote:I guess the window has passed on the Weaponizer Minicons. I'd love to know what happened.

I was under the impression that the stateside release of pretty much anything minicon-related got ruined by the first couple waves of minicons and deployers not selling so great.

D-Maximus_Prime wrote:We have a new sighting for you to check out today, this time in the form of a video showing that Combiner Force is hitting US retail! Youtuber Panda Prime Productions was kind enough to take this video from the local walmart, showing Combiner Force Beeswipe (Bumblebee and Sideswipe) And Prime Strong (Strongarm and Optimus Prime). In the video, it is shown that the figures appear to be going for around $9.84 per 2-pack, about the price of a 1-step changer. Now that you know they are hitting the shelves, go out and find yourselves some Combiner Force combiners!

Where in the US were these found?

I agree with the reviewer that you do get that WFC/FOC/TFA vibe with Soundwave

Blurr looks cool too, although pity you couldn't fit a Titan Master sized figure in is car mode coz that canopy looks like it could open

Zeedust wrote:

chuckdawg1999 wrote:I guess the window has passed on the Weaponizer Minicons. I'd love to know what happened.

I was under the impression that the stateside release of pretty much anything minicon-related got ruined by the first couple waves of minicons and deployers not selling so great.

Pretty much, and it's very disappointing. I wanted some weapons minicons, but there are still hoards of wave 1 and 2 guys clogging the shelves. Nothing past that

JelZe GoldRabbit wrote:

william-james88 wrote:[quote="Emerje"
We know they have bot modes

I don't think Jelze knows

I forgot, simply because the images for the smaller robot modes were smaller than the others and thus stood out less. I thus retract my statements and hide in shame [/quote]


No shame to be claimed they really do not promote their individual robot modes at all ; they are not shown in the Advert video and they are only tiny blurbs on the boxes - and the only reason I knew myself was I saw that video posted on the Seibertron Youtube page that shows the Sideswipe in individual robot mode.

I would put this down as another example of the terrible product information Transformers has - especially on RID toys (the Instructions are border-line unreadable.) They are so small it's easier to look up a scan online that look at the actual packets.

Kickback? Why... for... me no find.... where ME am...?

From Cybertron Philipines, we have in package images for the upcoming second assortment of the Robots in Disguise Combiner Force toys. While many toys repeat, we do get the new warrior Decepticons like Soundwave and Skywarp, and Blurr gets 3 toys through different classes. You also get a new class replacing the 3 step changers called Hyper Flip. These seem to be new molds but they are very reminiscent of the 3 step changers. Also, the repacked Windblade seems to have different paint apps. Let us know what you think. Here is the breakdown:

Combiner Force Legion Wave 2 – Blurr, Optimus Prime, Bumblebee, and Bisk
Combiner Force One-Step Changers Wave 2 – Blurr, a new version of Sideswipe, Optimus Prime, Bumblebee, and Drift
Combiner Force Hyper Flip Wave 1 – Optimus Prime, Bumblebee, Grimlock, and Thunderhoof
Combiner Force Crash Combiners Wave 2 – Skyhammer and Stormsledge, Primestrong and Beeside.
Combiner Force Warrior Wave 2 – Blurr, Soundwave, Skywarp, Grimlock and Windblade.

I do hope that Windblade's better than the last...

chuckdawg1999 wrote:I guess the window has passed on the Weaponizer Minicons. I'd love to know what happened.

They were never found in the US?

On the flipside, you guys got the weapon minicon 4 pack, Canada never got it.

Some of the most anticipated figures in the Robots in Diguise line are Warrior Blurr and Soundwave, especially since Blurr seems to be an interpretation of his Recue Bot look.

We have video reviews of both coming from Chefatron who found them at Toysrus in the Phillipines.

Enjoy and let us know what you think!

william-james88 wrote:

chuckdawg1999 wrote:I guess the window has passed on the Weaponizer Minicons. I'd love to know what happened.

They were never found in the US?

On the flipside, you guys got the weapon minicon 4 pack, Canada never got it.

Well, yes and no. It was released but I don't think it made it into all stores, the same thing with that other 4 pack with the weaponized Slipstream.