Video Review of Transformers Power of the Primes Voyager Grimlock
Thursday, November 30th, 2017 3:49AM CST
Categories: Toy News, ReviewsPosted by: Va'al Views: 19,112
Topic Options: View Discussion · Sign in or Join to reply
The Dinobot leader is shown off in the embedded video below in both robot and dinosaur mode, including a lot of junk in the trunk department - or tail, if you will - and the new addition for the line in the torso mode for Dinobot combiner Volcanicus. Also shown are the the other dino-buddies, Slash included, the Prime Master armor and compatibility, and some size comparisons. Check it out!
News Search
Got Transformers News? Let us know here!
Most Popular Transformers News
Most Recent Transformers News
Posted by SpikeyTigertron on November 30th, 2017 @ 4:55am CST
Posted by Emerje on November 30th, 2017 @ 5:43am CST
SpikeyTigertron wrote::APPLAUSE: I'm still not sure that the lower waist is transformed correctly. There seem to be some pegs that are sticking up that look suspicious.
They're shown sticking out like that on the gray model as well so that does seem to be the right way. The tabs are probably used in T-rex mode.
I'm guessing they aren't filling in the torso because they don't have the spare fists from the other two Dinobots. But then, they should just use Swoop and Slag's fists in the torso to demonstrate and borrow HFGs from somewhere else as hands.
Emerje
Posted by nycPrime on November 30th, 2017 @ 6:28am CST
Posted by DeathReviews on November 30th, 2017 @ 7:08am CST
Posted by Rated X on November 30th, 2017 @ 8:01am CST
Posted by King Kuuga on November 30th, 2017 @ 8:11am CST
Posted by dragons on November 30th, 2017 @ 8:44am CST
Posted by MECHdirge on November 30th, 2017 @ 9:29am CST
Posted by Skritz on November 30th, 2017 @ 12:13pm CST
For now, back to the original plan: Abominus.
Posted by Madeus Prime on November 30th, 2017 @ 12:18pm CST
Posted by Rodimus Knight on November 30th, 2017 @ 12:24pm CST
Posted by o.supreme on November 30th, 2017 @ 12:28pm CST
Posted by TF-fan kev777 on November 30th, 2017 @ 12:47pm CST
o.supreme wrote:I have no problem with any of the PotP figures so far. For me Grimlock is the best of both worlds. Having a fairly faithful adaptation of the original, and working as a Combiner. A well planned combiner that doesn't rely on any previous fan concepts in its design. I'm really happy with this line thus far, filling in a lot of the gaps that CW couldn't get to. I just hope what was leaked (basically 3/4 of the 2018 schedule), isn't all, I hope there is more to come.
If I understood the leaks correctly, they gave us all of 2018, not just 3/4. Wave 4 PotP is going to be like wave 6 TR with 1 new deluxe and re-releases from the first 3 waves filling out the rest of the wave. This would also match up calendar-wise with the re-release wave being out in the run up to Christmas. Waves 5 and 6 would be in 2019 (with some possible early sightings ahead of Christmas like PotP wave 1 this year.
Posted by o.supreme on November 30th, 2017 @ 12:52pm CST
Posted by nycPrime on November 30th, 2017 @ 1:34pm CST
Madeus Prime wrote:Am I the only one who's just excited we're getting a decent G1 representation of Grimlock finally? I know he's not perfect, but not all of us need MP standards in our toys.
I'm super excited about G1 dinobots! I have Slag and Swoop in hand and they are glorious. Swoop is damn near perfect to me. I'm usually not one to care too much about scale, but I do wish Slag was larger. Still a great figure nonetheless. Can't wait to get my hands on Grimlock and the others! Minus any potential QC issues, I'm sure I'll love the whole set, scale be damned. The combining aspect is an added bonus I'll likely never take advantage of.
Posted by steals_your_goats on November 30th, 2017 @ 1:52pm CST
Grimlock looks really nice too but I just wish the combined modes shoulders stopped at Grimlock's shoulders. The extra bits that stick out just make it look off.
Posted by bodrock on November 30th, 2017 @ 2:24pm CST
When will we start seeing the Prime Masters in-stores.....
Posted by Skritz on November 30th, 2017 @ 3:50pm CST
o.supreme wrote:Well, I can accept that *IF* a proposed 5th/6th waves had mostly new content (we still haven't seen the last 4 of the Prime Masters in any form...) But if the line just abruptly stopped at the end of 2018, then I'd be disappointed with its lack of completeness.
Surely they can at the very least work in a Monstructor in there, reusing a mix of Dinobots and Terrorcon molds. Especially since we've seen Cutthroat with an oddly Wildfly/Yokuryu head. He's one more combiner I expect but my hopes is that we could at least see Piranacon too. If not, oh well, I suppose it's not too bad since we could always see the Seacon later down the road in Generations since the combiner peg-and-port system for Deluxe+Voyager is a working model.
Meanwhile, Jazz remain a total anomaly to me. Why Jazz? Why the hell make a Deluxe Combiner Car that is a brand new mold and why make it Jazz? Why is it in there? Why not retool the CW Cars instead? Why bother with a new mold at all? And, again, why Jazz? Is there a plan to reuse this mold in later waves as a different character?
However: Could it be PotP suffered crippling budget cuts and that's why there are less new figures? Or are there just less Leader-class figures which is why Leader Evolution Optimus is getting a repack? Or alternatively, is there the expectations that it would be a figure high on demand, hence why it's showing up in two waves?
Posted by o.supreme on November 30th, 2017 @ 4:01pm CST
Skritz wrote: Meanwhile, Jazz remain a total anomaly to me. Why Jazz? Why the hell make a Deluxe Combiner Car that is a brand new mold and why make it Jazz? Why is it in there? Why not retool the CW Cars instead? Why bother with a new mold at all? And, again, why Jazz? Is there a plan to reuse this mold in later waves as a different character?
Jazz and Sideswipe are the only original Autobot Standard vehicles that didn't get a release in CW. I think some fans (at least myself) are hoping we will get a Sideswipe down the line, and perhaps 2 other Autobot cars from the 1985 line to complete the Autobot Combiner in which Inferno will be the torso. If Hasbro doesn't hopefully TT will.
Posted by Skritz on November 30th, 2017 @ 4:10pm CST
o.supreme wrote:Jazz and Sideswipe are the only original Autobot Standard vehicles that didn't get a release in CW.
Oooh, okay, this make perfect sense, then
Posted by D-Maximal_Primal on November 30th, 2017 @ 5:28pm CST
Skritz wrote:o.supreme wrote:Jazz and Sideswipe are the only original Autobot Standard vehicles that didn't get a release in CW.
Oooh, okay, this make perfect sense, then
I think they counted Sideswipe's involvement with his RiD self forming an arm of Ultra Bee. But of course it is not G1, something else entirely, but still a thought since they share the name, color, and mostly the look.
I wouldn't mind a Sideswipe though. I only have the MP, and I want a generations version.
Still gonna wait to see a Road Caesar down the line from someone soon hopefully
Posted by steals_your_goats on November 30th, 2017 @ 5:31pm CST
Posted by Skritz on November 30th, 2017 @ 6:13pm CST
D-Maximus_Prime wrote:Skritz wrote:o.supreme wrote:Jazz and Sideswipe are the only original Autobot Standard vehicles that didn't get a release in CW.
Oooh, okay, this make perfect sense, then
I think they counted Sideswipe's involvement with his RiD self forming an arm of Ultra Bee. But of course it is not G1, something else entirely, but still a thought since they share the name, color, and mostly the look.
I wouldn't mind a Sideswipe though. I only have the MP, and I want a generations version.
Still gonna wait to see a Road Caesar down the line from someone soon hopefully
Well, to be fair, Sideswipe can just be a red Sunstreaker with a new head and added port for Prime Armor.
Posted by william-james88 on November 30th, 2017 @ 11:27pm CST
Skritz wrote:Well, to be fair, Sideswipe can just be a red Sunstreaker with a new head and added port for Prime Armor.
I thought the whole concept of Sideswipe and Sunstreaker were that they had the same alt mode but different looking robot modes since they end up with different car parts on their chests. If they end up with the same look then I dont think that works at all.
RodimusRex wrote:I’ve been checking boxes and it looks to me like most of the Jazzes I find now are corrected.
If you see that, please send us a picture, that would be big news.
Madeus Prime wrote:Am I the only one who's just excited we're getting a decent G1 representation of Grimlock finally? I know he's not perfect, but not all of us need MP standards in our toys.
How did you feel about the previous G1 styled oyager grimlock we got, the Target exclusive from AOE?
bodrock wrote:When will we start seeing the Prime Masters in-stores.....
December/January
o.supreme wrote:I just hope what was leaked (basically 3/4 of the 2018 schedule), isn't all, I hope there is more to come.
hasbro confirmed all 12 Prime Masters would be released so we have more waves to come that have yet to be leaked.
Skritz wrote:Why not retool the CW Cars instead?
Because Hasbro is benevolent and knew that if they did, they would give me a heart attack.
Skritz wrote:However: Could it be PotP suffered crippling budget cuts and that's why there are less new figures? Or are there just less Leader-class figures which is why Leader Evolution Optimus is getting a repack? Or alternatively, is there the expectations that it would be a figure high on demand, hence why it's showing up in two waves?
The budget is the same. TR had 4 Leaders in he first 3 waves (Optimus, Blaster, Soundwave and Sixshot) and so does POTP (Rodimus, Optimus, Rodimus Unicronus and Optimus Primal). Plus 3 of the 4 in POTP are completely new molds while only 2 of the 4 in TR were new molds.
So budget wise, looking at the leaders, it looks like POTP has even more budget given on average per wave.
Posted by bodrock on December 1st, 2017 @ 12:19am CST
And I dig that voyager Grimlock!
Posted by Madeus Prime on December 1st, 2017 @ 1:16am CST
william-james88 wrote:How did you feel about the previous G1 styled oyager grimlock we got, the Target exclusive from AOE?
Not a huge fan of the mold, I like my inaccurate postured Grimlock. Plus this figure is just too hollow.
Posted by Va'al on December 1st, 2017 @ 2:12am CST
It appears we have an answer, courtesy of Planet Iacon over on Facebook, who bring us the full list of the first releases of Power of the Prime by Takara Tomy - though yet unnamed and lacking images - with the PP code for every figure (much like UW for Unite Warriors, or LG for Legends)! Currently scheduled for a May 2018 release, we're bound to hear more about this in the coming months, as only three Prime Masters, three Legend class, one Deluxe and two Leaders are currently shown off. Check it out below!
Takara Transformers Power of Prime Series:
PP-01 Micronus, 800 Yen
PP-02 Liege Maximo, 800 Yen
PP-03 Vector Prime, 800 Yen
PP-04 Dinobot Slash, 1500 Yen
PP-05 Wind Charger, 1500 Yen
PP-06 Beach comber, 1500 Yen
PP-07 Autobot Jazz, 2800 Yen
PP-08 Rodimus Prime, 7000 Yen
PP-09 Optimus Prime, 7000 Yen
All scheduled to be released on May 2018
Posted by bodrock on December 1st, 2017 @ 3:29am CST
My Platinum Grim looks interesting in alt mode, but his bot legs make Tall Man look short. If I wanted perfect, though, I'd save up for the MP.
I'm curious how PotP Grimlock will look in-hand...but I don't love his T-Rex.
Posted by steals_your_goats on December 1st, 2017 @ 6:37am CST
Legends look like they're just back by themselves going off of the price, which is slightly disappointing but since they're doing the pretenders separately there's nothing to go with them.
The lack of the other deluxe's and both voyagers still kinda gives hope for the return of unite warriors. I think they're saving the teams for that and releasing everyone else under this new subline. That would put the final nail in the coffin for a full team for jazz though.
Posted by TF-fan kev777 on December 1st, 2017 @ 8:06am CST
steals_your_goats wrote:The lack of the other deluxe's and both voyagers still kinda gives hope for the return of unite warriors. I think they're saving the teams for that and releasing everyone else under this new subline. That would put the final nail in the coffin for a full team for jazz though.
Yeah, Jazz being solo makes me wonder if they will even touch Inferno.
Dreadwind could still end up in either this line or a UW reboot. They might just be saving him to release as a 2 pack Buster/Hydra, or they could be using those 2 as limbs for Starscream (or whatever character they will use that torso for).
Posted by TF-fan kev777 on December 1st, 2017 @ 8:19am CST
Skritz wrote:Well, to be fair, Sideswipe can just be a red Sunstreaker with a new head and added port for Prime Armor.
No, just no. They are brothers, but not twins. But more important than that, the Breakdown/Sunstreaker mold sucks. New line, I want new molds. So far, we have Inferno, Dreadwind and Blackwing that are based on CW molds. Dreadwind and Blackwing have enough changes to satisfy me. So, Inferno is the only one that I would consider just a lazy new head CW redeco. I really hope they keep it to only him, at least for the regular releases.
Oddly enough, I'm much more open to a lazy redeco of the new PotP molds. CW had their time, let those molds have their rest now, unless they go with a Dreadwind/Blackwing level of retooling.
Posted by Tranzilla on December 1st, 2017 @ 8:54am CST
TF-fan kev777 wrote:steals_your_goats wrote:The lack of the other deluxe's and both voyagers still kinda gives hope for the return of unite warriors. I think they're saving the teams for that and releasing everyone else under this new subline. That would put the final nail in the coffin for a full team for jazz though.
Yeah, Jazz being solo makes me wonder if they will even touch Inferno.
Dreadwind could still end up in either this line or a UW reboot. They might just be saving him to release as a 2 pack Buster/Hydra, or they could be using those 2 as limbs for Starscream (or whatever character they will use that torso for).
I wouldn't mind seeing PW Starscream retooled for Skyquake and Jazz redone as Ricochet/Stepper.
Posted by Agamemnon on December 1st, 2017 @ 9:07am CST
Posted by o.supreme on December 1st, 2017 @ 9:08am CST
Posted by steals_your_goats on December 1st, 2017 @ 9:09am CST
Those prices are surprisingly reasonable. Makes me wonder just how different these are going to be compared to the Hasbro ones...
Posted by o.supreme on December 1st, 2017 @ 9:14am CST
steals_your_goats wrote:
Those prices are surprisingly reasonable. Makes me wonder just how different these are going to be compared to the Hasbro ones...
In this particular case, I'm guessing not very different at all
Posted by durroth on December 1st, 2017 @ 9:22am CST
Posted by Skritz on December 1st, 2017 @ 10:26am CST
Posted by o.supreme on December 1st, 2017 @ 10:30am CST
I mean...if you think about it, If they are contemplating a continuation of UW...You have:
Volcanicus
Starscream Combiner
Guard City
Abominus
Elita-1 Combiner
Battle Gaia
Predaking....
If they incorporate Guard City and even Battle Gaia into the mix, these are molds they already have at their disposal to pad things out while they manufacture new ones. This would just be awesome...but all we can do is wait and see.
Posted by TF-fan kev777 on December 1st, 2017 @ 10:42am CST
Skritz wrote:Well, it turns out that the Prime Masters differ in engineering from the Titan Masters in that they got a pin rather than a screw. Goddamn it! This may end up completely ruining my custom plans unless someone more experience than me can explain how to remove a pin. Because if that emblem part of the Prime Master can't be replaced I may end up having to use a Titan Master that doesn't match the robot mode of the Pretender character.
By pin, do you mean a rivet (with kind of a flat head)?
Some were able to "fix" Kup's and Orion Pax's leg panels by heating the rivet head with a soldering iron until the panel was able to pull out. Swapped the panels, then heated the rivet again to secure it. If the prime masters are the same way, you should be able to heat the rivet and pull the maxtrix/face off the back and the pin out the front.
It may just work pretty well, especially if you want to use a TR face. It would depend on the hole size for the rivet versus the screw in the master's body. If you get lucky and things match up, then you should be able to screw the TM face on through the PM body and not have to use the rivet to secure it.
Posted by Skritz on December 1st, 2017 @ 10:44am CST
TF-fan kev777 wrote:Skritz wrote:Well, it turns out that the Prime Masters differ in engineering from the Titan Masters in that they got a pin rather than a screw. Goddamn it! This may end up completely ruining my custom plans unless someone more experience than me can explain how to remove a pin. Because if that emblem part of the Prime Master can't be replaced I may end up having to use a Titan Master that doesn't match the robot mode of the Pretender character.
By pin, do you mean a rivet (with kind of a flat head)?
Some were able to "fix" Kup's and Orion Pax's leg panels by heating the rivet head with a soldering iron until the panel was able to pull out. Swapped the panels, then heated the rivet again to secure it. If the prime masters are the same way, you should be able to heat the rivet and pull the maxtrix/face off the back and the pin out the front.
It may just work pretty well, especially if you want to use a TR face. It would depend on the hole size for the rivet versus the screw in the master's body. If you get lucky and things match up, then you should be able to screw the TM face on through the PM body and not have to use the rivet to secure it.
I'm not really an expert, hell, I'm a noob at customizing and all that engineering so see for yourself.
Posted by Evil Eye on December 1st, 2017 @ 11:08am CST
Skritz wrote:TF-fan kev777 wrote:Skritz wrote:Well, it turns out that the Prime Masters differ in engineering from the Titan Masters in that they got a pin rather than a screw. Goddamn it! This may end up completely ruining my custom plans unless someone more experience than me can explain how to remove a pin. Because if that emblem part of the Prime Master can't be replaced I may end up having to use a Titan Master that doesn't match the robot mode of the Pretender character.
By pin, do you mean a rivet (with kind of a flat head)?
Some were able to "fix" Kup's and Orion Pax's leg panels by heating the rivet head with a soldering iron until the panel was able to pull out. Swapped the panels, then heated the rivet again to secure it. If the prime masters are the same way, you should be able to heat the rivet and pull the maxtrix/face off the back and the pin out the front.
It may just work pretty well, especially if you want to use a TR face. It would depend on the hole size for the rivet versus the screw in the master's body. If you get lucky and things match up, then you should be able to screw the TM face on through the PM body and not have to use the rivet to secure it.
I'm not really an expert, hell, I'm a noob at customizing and all that engineering so see for yourself.
Oh man, that really, REALLY sucks.
I have to say, between the cheap-looking Dinobots and their horrendous combined mode, the appalling leader classes, the atrocity that is Starscream, and now the non-customizable Prime Masters, this line looks like it's going to be a disaster. The only things I'm looking forward to now are the Terrorcons and Moonracer.
Posted by Skritz on December 1st, 2017 @ 11:15am CST
Edit: In case anyone wonder, I got a spare Triggerhappy, Misfire and Quake to make into Bomb-Burst, Submarauder (once the wings are removed) and Skullgrin. My original intent was to unscrew the Prime Master's backback and replace it with a 3d printed face but Hasbro just had to be douche. One has to wonder if it isn't deliberate because they don't want people to make customs. Which, if you ask me, is nonsense because customs generally require you to buy spare figures to hack apart and repaint. Hence, more sales. But big companies are generally stupid.
Posted by Rated X on December 1st, 2017 @ 11:24am CST
o.supreme wrote:steals_your_goats wrote:
Those prices are surprisingly reasonable. Makes me wonder just how different these are going to be compared to the Hasbro ones...
In this particular case, I'm guessing not very different at all
I agree. We could very well be seeing repeat of the Takara Trypticon syndrome where you are just paying for the same exact figure in a nicer box. The $65 leader class prices are especially suspect since Legends Overlord costs almost $100 on preorder. The good news is money saved. The bad news is we might not be getting the Leader figures in awesome shiny decos without the crappy grey plastic. I was planning to skip the Hasbro for those particulary. As far as the absence of the Dinobots in the preorders and the possible continuation of the unite warriors line, I would say pay close attention to Takaras deco for Slash. Whatever she gets is highly likely the other Dinobots will get. If she is chromed out, expect Diaclone Dinobots. G2 Dinobots might also be a possibility considering they are going G2 to release the Megatron mold.
Posted by steals_your_goats on December 1st, 2017 @ 11:43am CST
Not everything is some anti fan conspiracy guys.
Posted by Skritz on December 1st, 2017 @ 11:45am CST
steals_your_goats wrote:Not everything is some anti fan conspiracy guys.
Where did I even imply that?
Posted by steals_your_goats on December 1st, 2017 @ 11:48am CST
Skritz wrote:steals_your_goats wrote:Not everything is some anti fan conspiracy guys.
Where did I even imply that?
Skritz wrote: but Hasbro just had to be douche. One has to wonder if it isn't deliberate because they don't want people to make customs. But big companies are generally stupid.
Posted by Evil Eye on December 1st, 2017 @ 11:50am CST
steals_your_goats wrote:Yes God forbid a company not want their products to be bastardized and mutilated.
Why would Hasbro care if I buy a Prime Master and swap out the core panel (or just take it apart to repaint it)? A sale is a sale.
How dare they the more logical and less "Hur dur hasblow" answer is it's most likely cheaper or easier to manufacture that way.
I'm no engineer but I'm pretty sure a rivet is more expensive and labour intensive than a screw.
Not everything is some anti fan conspiracy guys.
Never attribute to malice what can be attributed to incompetence.
Posted by Skritz on December 1st, 2017 @ 11:55am CST
steals_your_goats wrote:Skritz wrote:steals_your_goats wrote:Not everything is some anti fan conspiracy guys.
Where did I even imply that?Skritz wrote: but Hasbro just had to be douche. One has to wonder if it isn't deliberate because they don't want people to make customs. But big companies are generally stupid.
I would not call that a 'conspiracy', for crying out loud. This is about on par with some videogame companies being against modding.
Posted by steals_your_goats on December 1st, 2017 @ 12:00pm CST
Skritz wrote:steals_your_goats wrote:Skritz wrote:steals_your_goats wrote:Not everything is some anti fan conspiracy guys.
Where did I even imply that?Skritz wrote: but Hasbro just had to be douche. One has to wonder if it isn't deliberate because they don't want people to make customs. But big companies are generally stupid.
I would not call that a 'conspiracy', for crying out loud. This is about on par with some videogame companies being against modding.
There is zero proof that this was a deliberate move against customizers. You're just making shit up to be mad about.