This page contains affiliate links. We may earn commissions when readers interact with or purchase items through these links. For more information, see our affiliate disclosures here.

TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set

Friday, October 30th, 2015 11:34PM CDT

Categories: Toy News, Site Articles, Interviews, Collector's Club News
Posted by: william-james88   Views: 69,471

Topic Options: View Discussion · Sign in or Join to reply

For those not subscribed to the thread pertaining to the Botcon 2016's "Dawn of Predacus" figure set, Seibertron has had the privileged of asking Fun Pub's very own TF_JW a few questions pertaining to the choices behind the set this year, especially the colours. Here below are answers from the Club's representative which I hope will shed some light on some questions and issues some may have had with what was revealed so far. And once you are done reading, come join the discussion on the official Botcon forums found right here on Seibertron!

- About Tarantulas

Personal observation here (as a guy who had nothing to do with the mold choice on this one).

Transmetal Tarantulas was... well he was a bit like Bruce Lee. He wasn't bulky, but the guy was trim and toned (look at those abs!). And then he had a ginormous linebacker's shoulder pads thrown on, giving him an extremely wide chest and shoulders.

From the day Rook was revealed, that's kind of how I saw him too. His upper legs aren't all that bulky, and with the bomb disposal claw defining his job, I can interpret him as a moderate-sized guy inside of massively oversized protective shielding. And with this being Tarantulas working with the Predacon Secret before/instead of on ancient Earth getting turned into a spider, I can catch some interesting story vibes of him putting on some riot gear or a bomb disposal suit for a particularly tricky assignment.

As for the size of the head, thanks for pointing that out. But there has been a 3D printing made and correctly fitted to the body, even if the digital color/paint mock-up might appear to show something different.


- About the decision to use these versions of the characters and these alt modes.

The decision to make a Beast Wars Anniversary set came, well, years ago. However, since there is a very limited catalog of beast molds accessible (unless you go back to the original 20 year old molds... which does have some appeal, don't get me wrong) and since there was no knowledge of what Hasbro or Takara Tomy might do (again, we're talking a couple years ago) the focus has pretty much always been on making vehicular forms for the BW cast.

As far as how the Beast Wars Combiner Wars came about, I can't get too much into that. However I will say that Hasbro were very much excited by the concept of Fun Pub using current molds and branding to make the toy line and exclusives more cohesive.

So then with Combiner Wars in mind, Tripredacus seemed the most compelling choice for Beast Wars. Two Deluxe beasts and a Mega beast forming one of the first combiners since G1 getting turned into two Deluxe vehicles and a Voyager. And then to finish off the team of 5, Ravage and Tarantulas fit that theme quite well as being agents of the Council in the show.

The decision of show versus toys... well the Tripredacus toys already exist. And quite honestly they still hold up quite well 20 years later. The show models, however, have never had any sort of physical representation, so it became incredibly tempting to give them one finally. (Not to mention the show models where non-beasts, so that was an interesting point as well.)

Lastly, having seen and held the 3D printed heads, and seeing all of the design work and digital sculpts that led up to them, I think they fit the bodies much better than the mock-ups make it seem. I think that once samples start rolling in, some minds might be changed.


- About choice of colour, what impact Combiner Wars had, prices and souvenir figures.

The Tripredacus Council are red, silver, and black while Ravage is black, silver, and red. So I don't think he stands out as much as some are expecting. And Predacus will pull some of Tarantulas' colors into the combined mode.

I'm not sure I would agree with the Combiner Wars molds being called a "roadbump". They affected the course of the design and concept process, sure, but their hurdle isn't any higher than any other repaints really.

For the rest of your post, all I can say about the souvenirs right now is that I'm quite excited about them. And that it's too early to talk costs just yet.


- All about what went into the colours chosen and how it represents the most show accurate scheme possible, according to the Transformers Club.

The lighting after the little red disc lights are ignited makes it fairly clear that they are red and silver. The red reflects brighter on them where the red lamps shine on them, but as has been pointed out they are red where the white lamp shines on them too.

My personal interpretation of the scene is that the trick of the light/light source cheat is actually the part where they appear solid gray. More than likely the animators wanted to make their reveal a little more dramatic and therefore cut the saturation to nil so that the characters could blend in with the shadows more. This is done quite a lot in live-action filming when a scene is shot in the day time but then edited to look like night time - the saturation is cut and a blue filter applied.

Then when the lamps are activated we get bright red characters against a blue backdrop. Very contrast-y, very dramatic.




Transformers News: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set
Credit(s): TF_JW

News Search

Got Transformers News? Let us know here!

Most Popular Transformers News

Most Recent Transformers News

Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738221)
Posted by 1984forever on October 31st, 2015 @ 1:45am CDT
Fun pub has to know that they're going to lose money on this set.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738241)
Posted by ZeroWolf on October 31st, 2015 @ 7:39am CDT
I would be surprised if they lost more money then usual, I think there is more people who like this then there is vocally against it. Of course this is just conjecture on my part.

I would prefer the predacon symbol to be used on the chest instead of a head design personally but I am looking forward to seeing the full combiner.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738245)
Posted by MisterNewUzer on October 31st, 2015 @ 8:19am CDT
The decision of show versus toys... well the Tripredacus toys already exist.


This is a crock of bull, two toys in this box set already prove that, not to mention countless other toys from previous Botcons:

Transmetal Tarantulas and Ravage/Jaguar XJ9 already exist, we should give them completely garish and awful paintjobs because they have toys that exist.

Hey, Scorponok already has an existing G1 toy, let's just paint him purple!

Hey, Clench has an existing toy, let's make him resemble Optimus Prime instead!

This 2006 Games of Deception set is gonna be the bee's knees! But Dirge and Thrust already have toys, so let's not bother remolding them and just make them straight repaints of the Starscream mold, they'll love that!




That is just lazy and uninformed. I had hope in a great set before, now I'm putting my money towards something more thought out.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738246)
Posted by SG Roadbuster on October 31st, 2015 @ 8:33am CDT
i know this is the beast wars 20th anniversary, but its also RID/Car Robots 15th anniversary. and those characters would have been much better suited to the combiner wars molds. gimmie sec and I can brainstorm up something.......

boxset-"Ruination Awakens"
Mega Octane-from Onlsaught
Rotor-from Alpha bravo
Movor-From Skydive (new head)
Armorhide-from Brawl (use toy colours, they look more interesting)
Rollbar-from Swindle, or Offroad if you want him to look different from Hound
Storm Jet from Cyclonus (new bot mode and combiner heads combiner head based on Grand Mal Megatron in homage to the original Storm Jet's Vehicon roots)

souvenir set 1
Fire Convoy/Optimus Prime from Hot Spot (new combiner head)
Spychanger Ironhide from Offroad
Spychanger Mirage from Drag Strip (new head)

souvenir set 2
REV from Breakdown (new head)
WARS from Streetwise

souvenir set 3
Hotshot from Deadend
Crosswise from Wheeljack


attendee figure
Side Swipe from Deadend (new head)

custom class
Daytonus from Wheeljack

i literally came up with that in five minutes. creating 3 full combiners between the boxset and souvenirs using the 2014 format. and quite honestly, the ruination and spychanger toys from the original rid line were the weakest of the line on account of being g1 toys.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738248)
Posted by Lucky Logician on October 31st, 2015 @ 8:48am CDT
1984forever wrote:Fun pub has to know that they're going to lose money on this set.

ZeroWolf wrote:I would be surprised if they lost more money then usual, I think there is more people who like this then there is vocally against it. Of course this is just conjecture on my part.
There is a lot revealed that I don't like so far. Several decisions made on this set absolutely baffle me. That said, I still plan on attending and buying it.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738249)
Posted by welcometothedarksyde on October 31st, 2015 @ 8:59am CDT
SG Roadbuster wrote:i know this is the beast wars 20th anniversary, but its also RID/Car Robots 15th anniversary. and those characters would have been much better suited to the combiner wars molds. gimmie sec and I can brainstorm up something.......

boxset-"Ruination Awakens"
Mega Octane-from Onlsaught
Rotor-from Alpha bravo
Movor-From Skydive (new head)
Armorhide-from Brawl (use toy colours, they look more interesting)
Rollbar-from Swindle, or Offroad if you want him to look different from Hound
Storm Jet from Cyclonus (new bot mode and combiner heads combiner head based on Grand Mal Megatron in homage to the original Storm Jet's Vehicon roots)

souvenir set 1
Fire Convoy/Optimus Prime from Hot Spot (new combiner head)
Spychanger Ironhide from Offroad
Spychanger Mirage from Drag Strip (new head)

souvenir set 2
REV from Breakdown (new head)
WARS from Streetwise

souvenir set 3
Hotshot from Deadend
Crosswise from Wheeljack


attendee figure
Side Swipe from Deadend (new head)

custom class
Daytonus from Wheeljack

i literally came up with that in five minutes. creating 3 full combiners between the boxset and souvenirs using the 2014 format. and quite honestly, the ruination and spychanger toys from the original rid line were the weakest of the line on account of being g1 toys.

:-? That's actually a really good idea, those molds fit well. My one critique is that the lack of Beast Molds in CW makes an RID homage not totally possible. That being said I don't think anyone would care.
Also this is not very timely, but does anyone else wish they ended up making a Towline? from the Electro mold a few years ago? Or even a Hubcap? He was the only unique character to Machine Wars after all.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738257)
Posted by TF_JW on October 31st, 2015 @ 10:00am CDT
Don't mistake my personal comments about the original Tripredacus toy as a comment from Fun Publications themselves. I happen to hold those figures in high regard.

But yes, Fun Publications' decision did come from the fact that there has been no physical representation of the show models. And Combiner Wars figures seemed like a good way to explore them.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738263)
Posted by Railbomb on October 31st, 2015 @ 10:54am CDT
I'm not entirely upset about this set. It's in no way horrible but I would have much rather had more figures from the Thrilling 30 molds. They could have used Centuritron for Tripredacus, Onyx Primal from Jhiaxus, Ravage from Skids or Bumblebee, Blacharachnia from Chromia, Silverbolt from BH Grimwing or Springer/Sandstorm, Transmutate from Whirl, Airrazor from Windblade, Evil Rhinox from Rhinox, Cybershark from Sky-Byte, Buzzsaw from Waspinator. I could probably go on with even more toy only characters and some BWII and Neo stuff but I'll stop here. They had a lot of other options for this set.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738264)
Posted by SG Roadbuster on October 31st, 2015 @ 11:06am CDT
welcometothedarksyde wrote:
SG Roadbuster wrote:i know this is the beast wars 20th anniversary, but its also RID/Car Robots 15th anniversary. and those characters would have been much better suited to the combiner wars molds. gimmie sec and I can brainstorm up something.......

boxset-"Ruination Awakens"
Mega Octane-from Onlsaught
Rotor-from Alpha bravo
Movor-From Skydive (new head)
Armorhide-from Brawl (use toy colours, they look more interesting)
Rollbar-from Swindle, or Offroad if you want him to look different from Hound
Storm Jet from Cyclonus (new bot mode and combiner heads combiner head based on Grand Mal Megatron in homage to the original Storm Jet's Vehicon roots)

souvenir set 1
Fire Convoy/Optimus Prime from Hot Spot (new combiner head)
Spychanger Ironhide from Offroad
Spychanger Mirage from Drag Strip (new head)

souvenir set 2
REV from Breakdown (new head)
WARS from Streetwise

souvenir set 3
Hotshot from Deadend
Crosswise from Wheeljack


attendee figure
Side Swipe from Deadend (new head)

custom class
Daytonus from Wheeljack

i literally came up with that in five minutes. creating 3 full combiners between the boxset and souvenirs using the 2014 format. and quite honestly, the ruination and spychanger toys from the original rid line were the weakest of the line on account of being g1 toys.


:-? That's actually a really good idea, those molds fit well. My one critique is that the lack of Beast Molds in CW makes an RID homage not totally possible. That being said I don't think anyone would care.
Also this is not very timely, but does anyone else wish they ended up making a Towline? from the Electro mold a few years ago? Or even a Hubcap? He was the only unique character to Machine Wars after all.


as for Beasts, why not use Beast Hunters? Laserback as Slapper, Skystalker as Darkscream, Ripclaw as Gasskunk, and Predaking as Gigatron.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738265)
Posted by Doctor McGrath on October 31st, 2015 @ 11:16am CDT
SG Roadbuster wrote:i know this is the beast wars 20th anniversary, but its also RID/Car Robots 15th anniversary. and those characters would have been much better suited to the combiner wars molds. gimmie sec and I can brainstorm up something.......

boxset-"Ruination Awakens"
Mega Octane-from Onlsaught
Rotor-from Alpha bravo
Movor-From Skydive (new head)
Armorhide-from Brawl (use toy colours, they look more interesting)
Rollbar-from Swindle, or Offroad if you want him to look different from Hound
Storm Jet from Cyclonus (new bot mode and combiner heads combiner head based on Grand Mal Megatron in homage to the original Storm Jet's Vehicon roots)

souvenir set 1
Fire Convoy/Optimus Prime from Hot Spot (new combiner head)
Spychanger Ironhide from Offroad
Spychanger Mirage from Drag Strip (new head)

souvenir set 2
REV from Breakdown (new head)
WARS from Streetwise

souvenir set 3
Hotshot from Deadend
Crosswise from Wheeljack


attendee figure
Side Swipe from Deadend (new head)

custom class
Daytonus from Wheeljack

i literally came up with that in five minutes. creating 3 full combiners between the boxset and souvenirs using the 2014 format. and quite honestly, the ruination and spychanger toys from the original rid line were the weakest of the line on account of being g1 toys.


Now this would have been something to get excited over.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738268)
Posted by Sabrblade on October 31st, 2015 @ 11:34am CDT
SG Roadbuster wrote:i know this is the beast wars 20th anniversary, but its also RID/Car Robots 15th anniversary.
2015 is the 15th anniversary. Car Robots debuted in 2000.


Railbomb wrote:I'm not entirely upset about this set. It's in no way horrible but I would have much rather had more figures from the Thrilling 30 molds. They could have used Centuritron for Tripredacus,
Making the Council guys be smaller than everyone else?

Railbomb wrote:Blacharachnia from Chromia, Silverbolt from BH Grimwing or Springer/Sandstorm,
Both of them were born on Earth.

Railbomb wrote:Transmutate from Whirl, Airrazor from Windblade,
They've already made toys of Transmutate and Airazor.

Yes, they're giving us another Tarantulas, but the backlash towards that redundancy furthers my point.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738290)
Posted by Deadput on October 31st, 2015 @ 1:49pm CDT
1984forever wrote:Fun pub has to know that they're going to lose money on this set.



You say this like your actually right about anything.


You'r not a Beast Wars fan (or well fan a fan of anything) you kinda have no place to say what is going to happen when it comes to sells.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738296)
Posted by Deadput on October 31st, 2015 @ 2:09pm CDT
MisterNewUzer wrote:This is a crock of bull, two toys in this box set already prove that, not to mention countless other toys from previous Botcons:

Transmetal Tarantulas and Ravage/Jaguar XJ9 already exist, we should give them completely garish and awful paintjobs because they have toys that exist.

Hey, Scorponok already has an existing G1 toy, let's just paint him purple!

Hey, Clench has an existing toy, let's make him resemble Optimus Prime instead!

This 2006 Games of Deception set is gonna be the bee's knees! But Dirge and Thrust already have toys, so let's not bother remolding them and just make them straight repaints of the Starscream mold, they'll love that!




That is just lazy and uninformed. I had hope in a great set before, now I'm putting my money towards something more thought out.






The hell are you rambling on about?


What you said does not make sense.





1: They have toys yes but Agent Ravage himself does not have a modern mold Alternators does not fit with classics.




2: That Scorponok did not have a modern articulated counterpart like Metroplex dpes and that mold did not have a G1 repaint already and they gave it a headmaster function.



3: How the hell does Clench look like Optimus Prime? He really doesn't.




4: Neither Dirge or Thrust were straight redecos of Starscream and at the time they did not have the classics update and Thrust does have remolding.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738300)
Posted by Ultra Markus on October 31st, 2015 @ 3:12pm CDT
Sabrblade wrote:
Hellscream9999 wrote:
Ultra Markus wrote:so what is the combiner torso mode going to look like?


Like Superion, only in red and grey >:oP
With some of Tarantulas's colors integrated to make all five components look good together.

i was hoping for a new head sculpt
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738303)
Posted by Sabrblade on October 31st, 2015 @ 3:24pm CDT
Ultra Markus wrote:
Sabrblade wrote:
Hellscream9999 wrote:
Ultra Markus wrote:so what is the combiner torso mode going to look like?


Like Superion, only in red and grey >:oP
With some of Tarantulas's colors integrated to make all five components look good together.

i was hoping for a new head sculpt
It'll have that too. Five new heads, remember?
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738309)
Posted by Hellscream9999 on October 31st, 2015 @ 4:11pm CDT
I honestly think that all the dislike towards this is unjust for the most part, due to frustration stemming from two sources.

1) CW mold fatigue; say what you will, but, I think that deep down, we're all tired of seeing these same d@mn molds already - so seeing them again is only exacerbating the situation. Sure nosecone brawl w/ a drill is new (and only seeing one release) and scattershot is 'new', but considering that they are taking up at least 2 waves of next year and the tfcc set, I think I can safely say that everyone is more than a little tired of hasbro pushing these on us and funpub.

2) Hasbro ignoring the BW anniversary, thus making it someone else's issue to deal with. A bunch of d!ck moves out of hasbro lately. Not releasing extra :CON: limbs for all of our spare torso's we bought, and now, ignoring the anniversary of a beloved series that salvaged the brand just so they could cram more gimmick-laden G1 crap down our throats :BANG_HEAD:
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738318)
Posted by Sabrblade on October 31st, 2015 @ 4:27pm CDT
Hellscream9999 wrote:I honestly think that all the dislike towards this is unjust for the most part, due to frustration stemming from two sources.

1) CW mold fatigue; say what you will, but, I think that deep down, we're all tired of seeing these same d@mn molds already - so seeing them again is only exacerbating the situation. Sure nosecone brawl w/ a drill is new (and only seeing one release) and scattershot is 'new', but considering that they are taking up at least 2 waves of next year and the tfcc set, I think I can safely say that everyone is more than a little tired of hasbro pushing these on us and funpub.

2) Hasbro ignoring the BW anniversary, thus making it someone else's issue to deal with. A bunch of d!ck moves out of hasbro lately. Not releasing extra :CON: limbs for all of our spare torso's we bought, and now, ignoring the anniversary of a beloved series that salvaged the brand just so they could cram more gimmick-laden G1 crap down our throats :BANG_HEAD:
There's one more sentiment I feel is at play here that thankfully is no longer as common as it used to be but still crops up every now and then:

3) Trukk not Munky! - The pro-G1, anti-BW (and anti-non-G1 in general) sentiment that has been in this fandom since 1996. It's quieted down over the years but still pops up every now and then whenever something wildly different from G1 shows up like the movies, Animated, Prime, Rescue Bots, etc. Of course, this sentiment seems to only come from the most irrational corners of the fandom while the majority is more mature and respectful towards the brand's diversity.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738342)
Posted by D-Maximal_Primal on October 31st, 2015 @ 5:39pm CDT
I do agree about the mold fatigue (I feel it despite still liking figures), the beast wars anniversary ignorance and the whole not-G1 thing. It it all a good argument. Hell, look at all the backlash from beast wars thrilling 30 figures. they don't get much respect :BOT:
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738369)
Posted by MisterNewUzer on October 31st, 2015 @ 9:07pm CDT
mirageandjazz1197 wrote:
MisterNewUzer wrote:This is a crock of bull, two toys in this box set already prove that, not to mention countless other toys from previous Botcons:

Transmetal Tarantulas and Ravage/Jaguar XJ9 already exist, we should give them completely garish and awful paintjobs because they have toys that exist.

Hey, Scorponok already has an existing G1 toy, let's just paint him purple!

Hey, Clench has an existing toy, let's make him resemble Optimus Prime instead!

This 2006 Games of Deception set is gonna be the bee's knees! But Dirge and Thrust already have toys, so let's not bother remolding them and just make them straight repaints of the Starscream mold, they'll love that!




That is just lazy and uninformed. I had hope in a great set before, now I'm putting my money towards something more thought out.






The hell are you rambling on about?


What you said does not make sense.





1: They have toys yes but Agent Ravage himself does not have a modern mold Alternators does not fit with classics.




2: That Scorponok did not have a modern articulated counterpart like Metroplex dpes and that mold did not have a G1 repaint already and they gave it a headmaster function.



3: How the hell does Clench look like Optimus Prime? He really doesn't.




4: Neither Dirge or Thrust were straight redecos of Starscream and at the time they did not have the classics update and Thrust does have remolding.


It makes sense in the context of the interviewees comment, in case you missed it (which obviously you did)

He essentially stated that because they have existing toys in the existing colors already, they needed to do something different. which is nonsense, obviously, because all of the toys I mentioned have existing toys and got updated figures via Botcon with mostly accurate colors.

So to respond to your misinformed statements:

I was obviously speaking in rhetorical nonsense, making statements in line with his previous "oh it already exists so let's do something different with this character" statement.

1- Jaguar X-9 exists, and though he doesn't quite fit in with "classics" as you stated, we're not talking about CHUG, this is about updates of characters who had pre-existing toys. The new Ravage in this Botcon set has a very similar visage to X-9.
Image

2- You're really missing the point here. If were to follow the nonsensical "it exists so lets make it different instead" logic, we would have the folks at Botcon making similar statements about a Purple Scorponok...

3- ... a Red and Blue Clench figure...

4- ...and Starscream repaints of the coneheads with no remolding at all.


HOWEVER, as you deigned to try and point out to me that which I was already aware of, none of those things exist, thankfully. INSTEAD, the Botcon guys said "oh, these folks all have existing toys... but instead of doing something completely different and off the wall with them, lets give them a GOOD modern update.

Which is what should be happening with the Tripredacus Council. Instead we're getting something that's based on colors nobody can even agree on the characters actually being or if it was a lighting issue.

You need to learn what sarcasm is, and practice your reading comprehension, friend.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738370)
Posted by Doctor McGrath on October 31st, 2015 @ 9:26pm CDT
mirageandjazz1197 wrote:
1984forever wrote:Fun pub has to know that they're going to lose money on this set.



You say this like your actually right about anything.


You'r not a Beast Wars fan (or well fan a fan of anything) you kinda have no place to say what is going to happen when it comes to sells.


*you're
**sales
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738376)
Posted by Sabrblade on October 31st, 2015 @ 9:54pm CDT
MisterNewUzer wrote:He essentially stated that because they have existing toys in the existing colors already, they needed to do something different. which is nonsense, obviously, because all of the toys I mentioned have existing toys and got updated figures via Botcon with mostly accurate colors.
Nowhere in TF_JW's commentary does he say that they "needed" to do anything different with the colors. He said that, because the original toys in their original colors both exist and still hold up to this day, while toys of the show models and colors don't exist, they opted to try something different from the toys by giving us something new that hasn't been done before. This is less "needing" to do something different and more "wanting" to do something different.

They had every right to go with either the original toy colors or the cartoon colors, and simply wanted to do the latter instead of the former since we already have the former but don't have the latter.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738377)
Posted by Hellscream9999 on October 31st, 2015 @ 9:55pm CDT
MisterNewUzer wrote:You need to learn what sarcasm is, and practice your reading comprehension, friend.


Sorry this is the internet, sarcasm is mostly in knowing a persons personality, and vocal inflection - neither of which can be conveyed through a post on the internet. Best thing you could do is italicize the sarcasm, as that is the nearest thing to a 'rule' on internet sarcasm as you can get.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738378)
Posted by Sabrblade on October 31st, 2015 @ 9:58pm CDT
Hellscream9999 wrote:
MisterNewUzer wrote:You need to learn what sarcasm is, and practice your reading comprehension, friend.


Sorry this is the internet, sarcasm is mostly in knowing a persons personality, and vocal inflection - neither of which can be conveyed through a post on the internet. Best thing you could do is italicize the sarcasm, as that is the nearest thing to a 'rule' on internet sarcasm as you can get.
Use of emoticons likewise helps in convey sarcasm. ;) (NOTE: this is not a sarcastic message)

Also sometimes helps to finish a sentence with this.[/sarcasm] (NOTE: this is not sarcastic either)
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738381)
Posted by Hellscream9999 on October 31st, 2015 @ 10:11pm CDT
Sabrblade wrote:
Hellscream9999 wrote:
MisterNewUzer wrote:You need to learn what sarcasm is, and practice your reading comprehension, friend.


Sorry this is the internet, sarcasm is mostly in knowing a persons personality, and vocal inflection - neither of which can be conveyed through a post on the internet. Best thing you could do is italicize the sarcasm, as that is the nearest thing to a 'rule' on internet sarcasm as you can get.
Use of emoticons likewise helps in convey sarcasm. ;) (NOTE: this is not a sarcastic message)

Also sometimes helps to finish a sentence with this.[/sarcasm] (NOTE: this is not sarcastic either)


Yup, there are ways to convey it, but, expecting people to pick up on it, when they have no idea on your views, or personality, it just doesn't work like that >:oP
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738425)
Posted by megatronus on November 1st, 2015 @ 12:08am CDT
I take no issue with the Tri-Predacus Council members. At this point, I think perhaps FunPub should have considered a Silverbolt-into-Thunderwing redeco and Hot Spot-into-Seaclamp redeco, but I'm more or less OK with the 3 Council members as red and grey representations of the show model.

Ravage and Tarantulus? Still misfires. I'm not sure I'm happy about hearing that Tarantulus' colors will be pulled into the combined mode. Would have been much happier with a black leg to match Ravage. (Still, I would have preferred something entirely different for Ravage.)
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738429)
Posted by Hellscream9999 on November 1st, 2015 @ 12:12am CDT
megatronus wrote:I take no issue with the Tri-Predacus Council members. At this point, I think perhaps FunPub should have considered a Silverbolt-into-Thunderwing redeco and Hot Spot-into-Seaclamp redeco, but I'm more or less OK with the 3 Council members as red and grey representations of the show model.

Ravage and Tarantulus? Still misfires. I'm not sure I'm happy about hearing that Tarantulus' colors will be pulled into the combined mode. Would have been much happier with a black leg to match Ravage. (Still, I would have preferred something entirely different for Ravage.)


I would've rather they reissued the bw tm ravage figure, but I'm still happy.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738433)
Posted by D-Maximal_Primal on November 1st, 2015 @ 12:25am CDT
megatronus wrote:I take no issue with the Tri-Predacus Council members. At this point, I think perhaps FunPub should have considered a Silverbolt-into-Thunderwing redeco and Hot Spot-into-Seaclamp redeco, but I'm more or less OK with the 3 Council members as red and grey representations of the show model.

Ravage and Tarantulus? Still misfires. I'm not sure I'm happy about hearing that Tarantulus' colors will be pulled into the combined mode. Would have been much happier with a black leg to match Ravage. (Still, I would have preferred something entirely different for Ravage.)

It still kinda works with the main black on Tarantulas and the black of Ravage, so who knows, maybe when the combined mode image is released many will change their minds :BOT:
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738436)
Posted by Sabrblade on November 1st, 2015 @ 12:28am CDT
megatronus wrote:At this point, I think perhaps FunPub should have considered a Silverbolt-into-Thunderwing redeco and Hot Spot-into-Seaclamp redeco,
I agree with this, but would prefer the Cyclonus version of the mold for the Thunderwing idea, since Cyclonus's altmode is more of a space jet than Silverbolt's is, which would fit Thunderwing more. :)

megatronus wrote:Ravage and Tarantulus? Still misfires. I'm not sure I'm happy about hearing that Tarantulus' colors will be pulled into the combined mode. Would have been much happier with a black leg to match Ravage. (Still, I would have preferred something entirely different for Ravage.)
I too wish Ravage had been another mold, but mostly because the Breakdown mold doesn't look good as Ravage even though it offers the most room to accomodate Ravage's head while allowing said head to both look good and be properly-sized. It's those chunky lower legs that kill the look.

And I've said my piece about how I wish Tarantulas had been someone else, as he's made redundant by the TFSS figure more blocky than I'd like a Tarantulas toy to be.

That said, I get that they were sticking to onscreen characters as the two of them are notable and memorable in their own right compared to instead using two non-show characters who aren't nearly as well-liked. After all, Ravage is a super popular G1 character and Tarantulas is one of the most popular BW characters. In spite of the shortcomings of these two toys, that they represent characters people already love has a sort of appeal on its own. I could see that Tarantulas being a hot item at retail were it part of the main Combiner Wars line instead of a BotCon exclusive, even if its orange feet look really goofy.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738440)
Posted by JazZeke on November 1st, 2015 @ 1:01am CDT
Wow. So, so much angst in this thread.

I'm one of those who's just burnt out on the CW molds already, even if I only have the Stunticons and one Protectobot. But I can understand that FunPub were painted into a corner, creatively. Hasbro probably put the pressure on them to use the CW molds. And better a subpar acknowledgement of Beast Wars' 20th than none. It looks like Hasbro isn't doing anything themselves, which is annoying.

Don't get me wrong, I have no interest in this set. But it's not worth getting worked up over. Hasbro has been doing amazing in the homage department these past few years and giving us fanboys more service than we ever imagined, but we're not entitled to it. I thought it was quite gentlemanly for a representative of FunPub to come on here and tell us the line of thought that went into their decisions. They didn't have to do that.

For those getting so worked up over this, I say to you: Go outside. That big, bright ball in the sky won't hurt you.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738474)
Posted by megatronus on November 1st, 2015 @ 9:52am CST
D-Maximus_Prime wrote:
megatronus wrote:Ravage and Tarantulus? Still misfires. I'm not sure I'm happy about hearing that Tarantulus' colors will be pulled into the combined mode. Would have been much happier with a black leg to match Ravage. (Still, I would have preferred something entirely different for Ravage.)

It still kinda works with the main black on Tarantulas and the black of Ravage, so who knows, maybe when the combined mode image is released many will change their minds :BOT:
Tarantulus is more of a dark blue - not black. He also has all those other highlights: orange, lime green, purple, etc. Also, even if he was predominantly black with red and grey highlights similar to Ravage, both figures would suffer from the poor mold choices.


Sabrblade wrote:
megatronus wrote:At this point, I think perhaps FunPub should have considered a Silverbolt-into-Thunderwing redeco and Hot Spot-into-Seaclamp redeco,
I agree with this, but would prefer the Cyclonus version of the mold for the Thunderwing idea, since Cyclonus's altmode is more of a space jet than Silverbolt's is, which would fit Thunderwing more. :)
Agreed. Cyclonus would have been the better choice.


Sabrblade wrote:
megatronus wrote:Ravage and Tarantulus? Still misfires. I'm not sure I'm happy about hearing that Tarantulus' colors will be pulled into the combined mode. Would have been much happier with a black leg to match Ravage. (Still, I would have preferred something entirely different for Ravage.)
I too wish Ravage had been another mold, but mostly because the Breakdown mold doesn't look good as Ravage even though it offers the most room to accomodate Ravage's head while allowing said head to both look good and be properly-sized. It's those chunky lower legs that kill the look.

And I've said my piece about how I wish Tarantulas had been someone else, as he's made redundant by the TFSS figure more blocky than I'd like a Tarantulas toy to be.

That said, I get that they were sticking to onscreen characters as the two of them are notable and memorable in their own right compared to instead using two non-show characters who aren't nearly as well-liked. After all, Ravage is a super popular G1 character and Tarantulas is one of the most popular BW characters. In spite of the shortcomings of these two toys, that they represent characters people already love has a sort of appeal on its own. I could see that Tarantulas being a hot item at retail were it part of the main Combiner Wars line instead of a BotCon exclusive, even if its orange feet look really goofy.
Both are boxy and chunky - that's really the main issue. Honestly, there just aren't many recent molds that would have done these two justice, unless FunPub went back a little farther and pulled out a few Prime: First Edition or PRiD molds, which have that sleek, organic look that lends itself to Beast Wars homages.

Besides, it's been the Club's prerogative to throw out obscure characters in the past (Ferak, anyone?), so even more so, when the end goal is a badass combiner, I would expect to see obscure limb choices that round out the look of that combiner, versus the TFSS 4.0 choices where the focus is the individual bots, with a neat combiner aspect that homages something more obscure.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738475)
Posted by Sabrblade on November 1st, 2015 @ 10:21am CST
megatronus wrote:Besides, it's been the Club's prerogative to throw out obscure characters in the past (Ferak, anyone?), so even more so, when the end goal is a badass combiner, I would expect to see obscure limb choices that round out the look of that combiner, versus the TFSS 4.0 choices where the focus is the individual bots, with a neat combiner aspect that homages something more obscure.
I think the Tripredacus Council itself fills the Club's quota of obscure characters fairly well, even outnumbering the more known and more popular Ravage and Tarantulas 3 to 2.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738485)
Posted by megatronus on November 1st, 2015 @ 11:10am CST
Sabrblade wrote:
megatronus wrote:Besides, it's been the Club's prerogative to throw out obscure characters in the past (Ferak, anyone?), so even more so, when the end goal is a badass combiner, I would expect to see obscure limb choices that round out the look of that combiner, versus the TFSS 4.0 choices where the focus is the individual bots, with a neat combiner aspect that homages something more obscure.
I think the Tripredacus Council itself fills the Club's quota of obscure characters fairly well, even outnumbering the more known and more popular Ravage and Tarantulas 3 to 2.

Ravage, sure, but BW Ravage? Pretty obscure.

Plus, I would challenge the obscurity of the Tri-Predacus Council. Between the toys and the show, I think they are fairly well known to BW fans.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738501)
Posted by Hellscream9999 on November 1st, 2015 @ 1:02pm CST
megatronus wrote:
Sabrblade wrote:
megatronus wrote:Besides, it's been the Club's prerogative to throw out obscure characters in the past (Ferak, anyone?), so even more so, when the end goal is a badass combiner, I would expect to see obscure limb choices that round out the look of that combiner, versus the TFSS 4.0 choices where the focus is the individual bots, with a neat combiner aspect that homages something more obscure.
I think the Tripredacus Council itself fills the Club's quota of obscure characters fairly well, even outnumbering the more known and more popular Ravage and Tarantulas 3 to 2.

Ravage, sure, but BW Ravage? Pretty obscure.

Plus, I would challenge the obscurity of the Tri-Predacus Council. Between the toys and the show, I think they are fairly well known to BW fans.


The tri-predacus council wasn't obscure, they played an important part of the best season finale of all of tf lore, and bw ravage is G1 ravage, and I'm sure plenty of people remember that quite well as a cool throw-back to G1, that turned into something so much more. I don't why these guys have to be 'obscure', they made them to celebrate the anniversary, you don't need to look into it any further >:oP
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738508)
Posted by SW's SilverHammer on November 1st, 2015 @ 1:17pm CST
Hellscream9999 wrote:
megatronus wrote:
Sabrblade wrote:
megatronus wrote:Besides, it's been the Club's prerogative to throw out obscure characters in the past (Ferak, anyone?), so even more so, when the end goal is a badass combiner, I would expect to see obscure limb choices that round out the look of that combiner, versus the TFSS 4.0 choices where the focus is the individual bots, with a neat combiner aspect that homages something more obscure.
I think the Tripredacus Council itself fills the Club's quota of obscure characters fairly well, even outnumbering the more known and more popular Ravage and Tarantulas 3 to 2.

Ravage, sure, but BW Ravage? Pretty obscure.

Plus, I would challenge the obscurity of the Tri-Predacus Council. Between the toys and the show, I think they are fairly well known to BW fans.


The tri-predacus council wasn't obscure, they played an important part of the best season finale of all of tf lore, and bw ravage is G1 ravage, and I'm sure plenty of people remember that quite well as a cool throw-back to G1, that turned into something so much more. I don't why these guys have to be 'obscure', they made them to celebrate the anniversary, you don't need to look into it any further >:oP


I don't get why people keep saying that the Trippredacus council, or ravage, are obscure characters in relation to beast wars. They aren't. 3H beast wars characters are obscure, the tripredacus council and ravage were involved with major plot points and movements in the beast wars cartoon; not just behind the scenes, or implied actions.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738515)
Posted by megatronus on November 1st, 2015 @ 1:47pm CST
When I say BW Ravage is obscure, it's only in relation to some of the better known things, such as the Tri-Predacus Council, which came up constantly and was mentioned beyond the 2 episodes Ravage appeared in. All of this is relative, not objective.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738516)
Posted by Sabrblade on November 1st, 2015 @ 2:01pm CST
The Tripredacus Council are about as obscure as Devcon, probably even moreso, as they were only in a single episode of the whole show, and only in just one scene (I guess Transmutate would be more on Devcon's level of obscurity, having had an entire episode to itself). Don't forget that most of us who remember these three are uber-fans, higher up of nerd scale than the average fan. And because the Beast Wars had so few characters compared to most TF cartoons, even the most minimal roles tend to be listed among the main cast for the sake of bumping up the character roster.

But, to a lot of fans, these three are nobodies. As popular as Beast Wars is, there's still a large portion of the fandom that, either willfully or apathetically, ignores it, preferring to focus on other series like G1, the movies, Prime, or the IDW comics. To these fans, who aren't as versed in the BW lore, the Council is virtually a nonentity, as these fans have no connection or knowledge of its members, nor (in some rarer cases) care to.

megatronus wrote:When I say BW Ravage is obscure, it's only in relation to some of the better known things, such as the Tri-Predacus Council, which came up constantly and was mentioned beyond the 2 episodes Ravage appeared in. All of this is relative, not objective.
Outside of "The Agenda", the Council was only ever mentioned one other time, in "Other Victories", a whole 11 episodes after the 3-parter, and in the same episode that took Tarantulas (and any importance the Council had) out of the show.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738521)
Posted by SW's SilverHammer on November 1st, 2015 @ 2:25pm CST
Sabrblade wrote:The Tripredacus Council are about as obscure as Devcon, probably even moreso, as they were only in a single episode of the whole show, and only in just one scene (I guess Transmutate would be more on Devcon's level of obscurity, having had an entire episode to itself). Don't forget that most of us who remember these three are uber-fans, higher up of nerd scale than the average fan. And because the Beast Wars had so few characters compared to most TF cartoons, even the most minimal roles tend to be listed among the main cast for the sake of bumping up the character roster.

But, to a lot of fans, these three are nobodies. As popular as Beast Wars is, there's still a large portion of the fandom that, either willfully or apathetically, ignores it, preferring to focus on other series like G1, the movies, Prime, or the IDW comics. To these fans, who aren't as versed in the BW lore, the Council is virtually a nonentity, as these fans have no connection or


Wow you are either being really obtuse about beast wars, or are trying to downplay it's notoriety. I've talked to people who watched beast wars as a kid, and never had any other interaction with transformers, and they remember the tripredacus council and ravages involvement in the beast wars. Why? Because the agenda parts one through three are some of the most memorable, tightly written episodes of the 52 episode run. The tripredecus council, ravage, and even transmutate are nowhere near devcon levels of obscure. Here's why. Devcon appeared in one episode of the 98 episode of the sunbow cartoon. The sunbow cartoon, wasn't as well written as the beast wars, and the shows continuity was an absolute clusterfuck. Whenever a new character was introduced in Sunbow cartoon, they really had no character development or importance. In Beast wars, the writers tried to give new characters, even if they appeared in one episode, character development or influence over the plot and characters.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738530)
Posted by Hellscream9999 on November 1st, 2015 @ 3:07pm CST
SW's SilverHammer wrote:
Sabrblade wrote:The Tripredacus Council are about as obscure as Devcon, probably even moreso, as they were only in a single episode of the whole show, and only in just one scene (I guess Transmutate would be more on Devcon's level of obscurity, having had an entire episode to itself). Don't forget that most of us who remember these three are uber-fans, higher up of nerd scale than the average fan. And because the Beast Wars had so few characters compared to most TF cartoons, even the most minimal roles tend to be listed among the main cast for the sake of bumping up the character roster.

But, to a lot of fans, these three are nobodies. As popular as Beast Wars is, there's still a large portion of the fandom that, either willfully or apathetically, ignores it, preferring to focus on other series like G1, the movies, Prime, or the IDW comics. To these fans, who aren't as versed in the BW lore, the Council is virtually a nonentity, as these fans have no connection or


Wow you are either being really obtuse about beast wars, or are trying to downplay it's notoriety. I've talked to people who watched beast wars as a kid, and never had any other interaction with transformers, and they remember the tripredacus council and ravages involvement in the beast wars. Why? Because the agenda parts one through three are some of the most memorable, tightly written episodes of the 52 episode run. The tripredecus council, ravage, and even transmutate are nowhere near devcon levels of obscure. Here's why. Devcon appeared in one episode of the 98 episode of the sunbow cartoon. The sunbow cartoon, wasn't as well written as the beast wars, and the shows continuity was an absolute ****. Whenever a new character was introduced in Sunbow cartoon, they really had no character development or importance. In Beast wars, the writers tried to give new characters, even if they appeared in one episode, character development or influence over the plot and characters.


Exactly, they even had toys;

(AND BEFORE ANYONE SAYS ANYTHING ABOUT THEM 'NOT LOOKING LIKE THEIR TOYS', NO, THEY DID NOT - NEITHER DID THE REST OF THE CAST UP 'TIL SEASON 2, BUT THE CONNECTION WAS THERE - which is quite a bit more than I can say about most other minor characters in other shows)
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738546)
Posted by william-james88 on November 1st, 2015 @ 3:33pm CST
I have no clue who devcon is but i know the tripedicus council quite well. Tripedicus and Magnaboss were really important toys to me since they were opposing beast combiners and i found it awesome that the components of tripedicus actually appeared in the show.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738548)
Posted by Hellscream9999 on November 1st, 2015 @ 3:36pm CST
william-james88 wrote:I have no clue who devcon is but i know the tripedicus council quite well. Tripedicus and Magnaboss were really important toys to me since they were opposing beast combiners and i found it awesome that the components of tripedicus actually appeared in the show.


Devcon's that one guy who showed up, didn't do anything memorable, then left - never to be seen again, until botcon a couple years ago >:oP
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738553)
Posted by SW's SilverHammer on November 1st, 2015 @ 3:47pm CST
Hellscream9999 wrote:
william-james88 wrote:I have no clue who devcon is but i know the tripedicus council quite well. Tripedicus and Magnaboss were really important toys to me since they were opposing beast combiners and i found it awesome that the components of tripedicus actually appeared in the show.


Devcon's that one guy who showed up, didn't do anything memorable, then left - never to be seen again, until botcon a couple years ago >:oP

Which emphasizes my point in that the beast wars writers tried to make characters that appeared in one episode, Transmutate, the Tripredacus council, et cetera, memorable or influential over the plot and characters. In sunbow G1, new characters were there for two reasons, new toys, or to advance the plot in the most utilitarian of ways. Devcon being the latter of the two options.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738558)
Posted by ZeroWolf on November 1st, 2015 @ 3:57pm CST
To be fair they would of looked like their toys if mainframe had a bit more time. However I will back up sarblades point of the council, as all I thought of them was a plot point, just background fluff, I would put ravage above them certainly in a list of things I remember from beast wars.

Can't we all agree however that it's a shame that Magnaboss isn't part of this set as he got nothing from the cartoon (western one at least)
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738617)
Posted by Lucky Logician on November 1st, 2015 @ 9:10pm CST
ZeroWolf wrote:Can't we all agree however that it's a shame that Magnaboss isn't part of this set as he got nothing from the cartoon (western one at least)


TF_JW wrote:As far as how the Beast Wars Combiner Wars came about, I can't get too much into that. However I will say that Hasbro were very much excited by the concept of Fun Pub using current molds and branding to make the toy line and exclusives more cohesive.

I've got a hunch that Magnaboss will probably be in the souvenir sets. The box set is Combiner Wars Dawn of the Predacus. It only makes sense to include the other figures in with that theme. Heck, other than the Armada Starscream mold that FubPub is using for next year, every other announced figure for 2016 is a CW figure. I'd be surprised if the souvenirs figures are anything but Combiner Wars figures.

As a side-note, FunPub, PLEASE SURPRISE ME. I need that Oilmaster repainted as Optimus Prime / Primal. It is a munky and a trukk. There is absolutely nothing better than that.
THIS NEEDS TO BE MADE! :michaelbay:
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738721)
Posted by Hellscream9999 on November 2nd, 2015 @ 2:39pm CST
Lucky Logician wrote:
ZeroWolf wrote:Can't we all agree however that it's a shame that Magnaboss isn't part of this set as he got nothing from the cartoon (western one at least)


TF_JW wrote:As far as how the Beast Wars Combiner Wars came about, I can't get too much into that. However I will say that Hasbro were very much excited by the concept of Fun Pub using current molds and branding to make the toy line and exclusives more cohesive.

I've got a hunch that Magnaboss will probably be in the souvenir sets. The box set is Combiner Wars Dawn of the Predacus. It only makes sense to include the other figures in with that theme. Heck, other than the Armada Starscream mold that FubPub is using for next year, every other announced figure for 2016 is a CW figure. I'd be surprised if the souvenirs figures are anything but Combiner Wars figures.

As a side-note, FunPub, PLEASE SURPRISE ME. I need that Oilmaster repainted as Optimus Prime / Primal. It is a munky and a trukk. There is absolutely nothing better than that.
THIS NEEDS TO BE MADE! :michaelbay:


I wouldn't be surprised to see them;

On the other hand, that trukk/munky figure, might be too niche to make a souvenir - while an excellently snarky use of the mold, making it available outside of the souvenir sets, and relinquishing the need to pay a fee to buy him, might make it go over well.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738723)
Posted by RodimusRex on November 2nd, 2015 @ 2:46pm CST
They did a poll to see which G2 characters people would like as combiners.

I could see if this is a pre-BW Predacus, maybe the souvenir set would have Prowl, Ironhide, and Silverbolt as its basis with three more figures drawn from G2 to form Magnaboss as a post-G2/Pre-BW combiner?
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738730)
Posted by ZeroWolf on November 2nd, 2015 @ 3:01pm CST
A g2 combiner? Given what molds we have access to and what autobots were out during g2, I guess one of the other figures would be drawn from the stunticon molds...and alpha bravo as rotorstorm. Oh wait! They could do cw prime as thunderclash...but then that just seems a bit of a cop out given the theme
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738749)
Posted by RodimusRex on November 2nd, 2015 @ 4:10pm CST
ZeroWolf wrote:A g2 combiner? Given what molds we have access to and what autobots were out during g2, I guess one of the other figures would be drawn from the stunticon molds...and alpha bravo as rotorstorm. Oh wait! They could do cw prime as thunderclash...but then that just seems a bit of a cop out given the theme


It was a Twitter survey. They asked which G2 combiner people would like and it was basically a "G2 Defensor or someone else? Tell us what Autobot combiner you'd like" poll.

Cyberjets would be an option. The Thunderclash/Turbomaster combiner makes sense.

I was thinking maybe you just do a Maximal Council/Matrix Templar themed combiner.

Skylynx redeco'd as Magnaboss. Created from the fused bodies of Prowl, Ironhide, and Silverbolt as a prototype Maximal chimera. Mention work is being done to restore their individuality.

Limbs of King Atlas, G2-inspired Rodimus, Sentinel Maximus, and Cheetor. Combine to form Magma Maximus?

Just playing with the idea that the new Botcon stuff is post-G2/Machine Wars, pre-Beast Wars.


Or you could have G2 Iron Hide, Machine Wars Prowl, another Silverbolt (again, I think as a limb with an homage color-wise to Beast Wars), and maybe round it out with Dai Atlas and Rodimus?

A couple ways you could go with that. Purple, G2 Rodimus as a limb. Or maybe you make Rodimus the core and make him a Hot Spot retool inspired by the never-released New Rodimus. (We have yet to see a red deco of that mold.) Or maybe Dai Atlas or King Atlas as a Cyclonus retool but I think that's too much like Sea Clamp.

I think however you do this, you kind of want a Prowl, a Silverbolt, an Ironhide -- or Magnaboss as one figure -- and 2-4 other prominent late era Autobots or early Maximals.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738831)
Posted by william-james88 on November 2nd, 2015 @ 10:13pm CST
I dont know what the technical term for it is, but there is a notion that once a piece of art is sent out to the public, what the public makes of it can become as credible an interpretation as the author's. For example, Tommy Wiseau thought the Room was a masterpiece of drama and the audiences thought it was a joke. And it was so overwhelming that he changed his outlook of the film from a marketing standpoint from then on. Anyways, its the long way to say that even though what I write below confirms that the director of the specific Beast Wars scene intended the Tripedicus council to be just grey, the interpretation of Botcon is just as valid, given how the scene actually plays out.

TFW user Verno wrote to Cal Shumiatcher, the director of the Beast Wars Episode the scene comes from (The Agenda Part 1) and he gave a detailed account of his intentions with the light sources and what they meant in terms of the colour of the actual characters:

Originally Posted by Cal Shumiatcher
Wow - this really came out of the blue. And you’ve picked one of my favourite scenes from the point of view of innovation on a limited budget. One of the great things about Beast Wars was the creative freedom afforded to directors on the show. And of course the amazing scripts made working on this show so rewarding.

This scene was a typical production challenge and I’m very proud of the results.

Here’s what I was given:

1) the design of a massive spaceship - exterior only. Because this was the only scene that ever takes place within the ship, no interior set was ever designed.
2) Three rough character models that had virtually no moving parts.
3) a three page dialogue scene that was important but virtually all exposition. no action.

Hmmm. How to keep the audience awake? As I recall, the Tripredacus Council were essentially putting a hit out on one of our good guys. So I decided to play them like film noir gangsters, sitting in a smoke filled room under a swinging ‘china hat’ lamp. The swinging lamp was supposed to be the only light source in the room and there was to be virtually no ambient light. I was looking for the super high contrast, film noir look - partially because I love the look and partly because there was no set! So I decided that we’d play the interior of the spaceship like a huge cavernous empty space - almost a bottomless pit with the council members floating in space.

So we set it up, and everything was great, except you couldn’t see the character’s faces. The overhead light was casting such hard shadows. So the supervising animator, Eric Reynolds - (who has gone on to supervise animation on movies like Avatar, The Hobbit and The Hunger Games), suggested the Council kind of ‘sign in’ when they arrived at the table by touching a palm reading pad that would illuminate when their identity was confirmed. The glowing pad provided a soft red light on the bodies. Now you have to remember that these were very rudimentary models that were quickly finished and textured. So I can only imagine that some parts of the characters were more reflective than others. We didn’t really plan it, but it looked really cool when parts of them glowed with red, so we went with it. Sorry, that’s pretty much all there is to it.

I love how the scene ends - one character grabs the lamp to stop it swinging and delivers a line I still remember well - “Terminate, with extreme prejudice”. It was so camp, and so cool all at once.

Thanks for your enquiry - and for picking a scene that I remember so well.
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738832)
Posted by Lucky Logician on November 2nd, 2015 @ 10:17pm CST
RodimusRex wrote:It was a Twitter survey. They asked which G2 combiner people would like and it was basically a "G2 Defensor or someone else? Tell us what Autobot combiner you'd like" poll.
You got me thinking with this. You know a perfect combiner that I would love to see again? NEXUS MAXIMUS! Since Combiner Wars is all about replacing the Energon mold combiners, why not replace the club exclusive one too?

Heatwave - Onslaught
Topspin - Alpha Bravo
Landquake - Brawl
Breakaway - Air Raid
Skyfall - Powerglide

The only major problem with that is Skyfall looks just like Powerglide. So either he would have to take a new form, or he would have to be replaced by another member. And since all the members are the same red/blue colors, this would make for one very pretty combiner figure. 8-)
Re: TF Club (Fun Pub) answers fans' questions regarding "Dawn of the Predacus" BotCon 2016 set (1738833)
Posted by JazZeke on November 2nd, 2015 @ 10:18pm CST
william-james88 wrote:I dont know what the technical term for it is, but there is a notion that once a piece of art is sent out to the public, what the public makes of it can become as credible an interpretation as the author's. For example, Tommy Wiseau thought the Room was a masterpiece of drama and the audiences thought it was a joke. And it was so overwhelming that he changed his outlook of the film from a marketing standpoint from then on. Anyways, its the long way to say that even though what I write below confirms that the director of the specific Beast Wars scene intended the Tripedicus council to be just grey, the interpretation of Botcon is just as valid, given how the scene actually plays out.

TFW user Verno wrote to Cal Shumiatcher, the director of the Beast Wars Episode the scene comes from (The Agenda Part 1) and he gave a detailed account of his intentions with the light sources and what they meant in terms of the colour of the actual characters:

Originally Posted by Cal Shumiatcher
Wow - this really came out of the blue. And you’ve picked one of my favourite scenes from the point of view of innovation on a limited budget. One of the great things about Beast Wars was the creative freedom afforded to directors on the show. And of course the amazing scripts made working on this show so rewarding.

This scene was a typical production challenge and I’m very proud of the results.

Here’s what I was given:

1) the design of a massive spaceship - exterior only. Because this was the only scene that ever takes place within the ship, no interior set was ever designed.
2) Three rough character models that had virtually no moving parts.
3) a three page dialogue scene that was important but virtually all exposition. no action.

Hmmm. How to keep the audience awake? As I recall, the Tripredacus Council were essentially putting a hit out on one of our good guys. So I decided to play them like film noir gangsters, sitting in a smoke filled room under a swinging ‘china hat’ lamp. The swinging lamp was supposed to be the only light source in the room and there was to be virtually no ambient light. I was looking for the super high contrast, film noir look - partially because I love the look and partly because there was no set! So I decided that we’d play the interior of the spaceship like a huge cavernous empty space - almost a bottomless pit with the council members floating in space.

So we set it up, and everything was great, except you couldn’t see the character’s faces. The overhead light was casting such hard shadows. So the supervising animator, Eric Reynolds - (who has gone on to supervise animation on movies like Avatar, The Hobbit and The Hunger Games), suggested the Council kind of ‘sign in’ when they arrived at the table by touching a palm reading pad that would illuminate when their identity was confirmed. The glowing pad provided a soft red light on the bodies. Now you have to remember that these were very rudimentary models that were quickly finished and textured. So I can only imagine that some parts of the characters were more reflective than others. We didn’t really plan it, but it looked really cool when parts of them glowed with red, so we went with it. Sorry, that’s pretty much all there is to it.

I love how the scene ends - one character grabs the lamp to stop it swinging and delivers a line I still remember well - “Terminate, with extreme prejudice”. It was so camp, and so cool all at once.

Thanks for your enquiry - and for picking a scene that I remember so well.

Awesome. I always found that scene so incredibly compelling as a kid.

Transformers and More @ The Seibertron Store

Visit our store on eBay
These are affiliate links. We may earn commissions when you purchase items or services through these links.
Visit shop.seibertron.com to buy "Transformers KING GRIMLOCK #4 Cvr A IDW Comics 2021 SEP210484 4A (CA) Wilkins"
Transformers KING ...
Visit shop.seibertron.com to buy "TRANSFORMERS #1 5th ptg Cvr B Image Comics 2024 0224IM846 (CA) Bratukhin"
NEW!
TRANSFORMERS #1 5t ...
Visit shop.seibertron.com to buy "Transformers VALENTINE'S DAY SPECIAL RI 1:10 IDW Comics DEC190657 230124A"
Transformers VALEN ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #57 Marvel Comics 1989 (W) Furman (A/CA) Delbo 210422B"
THE TRANSFORMERS # ...
Visit shop.seibertron.com to buy "Transformers Best of BEASTS #1 IDW Comics 2022 MAY221564 (CA) Biggie"
Transformers Best ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #20 Marvel Comics 1986 (A/CA) Trimpe (W) Budiansky 210422A"
THE TRANSFORMERS # ...
Visit shop.seibertron.com to buy "Transformers REIGN STARSCREAM #2 Cvr A IDW Comics 2008 Movie Sequel 2A 210411B"
Transformers REIGN ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #18 Marvel Comics 1986 (CA) Trimpe (W) Budiansky 210422B"
THE TRANSFORMERS # ...
Visit shop.seibertron.com to buy "VOID RIVALS #5 2nd ptg Cvr A Bitterness Image Comics 2023 1023IM898 (CA) Howard"
VOID RIVALS #5 2nd ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #29 Marvel Comics 1987 (W/CA) Budiansky 210422A"
THE TRANSFORMERS # ...
Visit shop.seibertron.com to buy "TRANSFORMERS BEAST WARS #5 Cvr A IDW Comics 2021 APR210675 5A (A/CA) Burcham"
TRANSFORMERS BEAST ...
Visit shop.seibertron.com to buy "VOID RIVALS #6 Cvr D 1:25 Image Comics 0923IM467 6D (CA) Darboe (W) Kirkman"
VOID RIVALS #6 Cvr ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #35 Marvel Comics 1987 (W) Budiansky (CA) Springer 231010N"
THE TRANSFORMERS # ...
Visit shop.seibertron.com to buy "THE TRANSFORMERS #26 Marvel Comics 1987 (CA) Trimpe (W) Budiansky 231010B"
THE TRANSFORMERS # ...
* Price and quantities subject to change. Shipping costs, taxes and other fees not included in cost shown. Refer to listing for current price and availability.
Find the items above and thousands more at the Seibertron Store on eBay
Transformers Podcast: Twincast / Podcast #349 - Agent of Chaos
Twincast / Podcast #349:
"Agent of Chaos"
MP3 · iTunes · RSS · View · Discuss · Ask
Posted: Saturday, May 4th, 2024

Featured Products on Amazon.com

These are affiliate links. We may earn commissions when you purchase items or services through these links.
Buy "Transformers Authentics Starscream" on AMAZON
Buy "Transformers: Generations Power of The Primes Leader Evolution Rodimus Unicronus" on AMAZON
Buy "Transformers: Generations Power of The Primes Deluxe Class Dinobot Sludge" on AMAZON
Buy "Transformers Generations Titans Return Titan Class Trypticon" on AMAZON
Buy "Transformers Generations Power of The Primes Deluxe Class Blackwing" on AMAZON
Buy "Transformers: Bumblebee Movie Toys, Power Charge Bumblebee Action Figure - Spinning Core, Lights and Sounds - Toys for Kids 6 and Up, 10.5-inch" on AMAZON
Buy "Transformers Deluxe Ratchet Action Figure" on AMAZON
Buy "Transformers: Generations Power of The Primes Legends Class Cindersaur" on AMAZON
Buy "Transformers Generations Titans Return Deluxe Sergeant Kup and Flintlock" on AMAZON
Buy "Transformers: Generations Power of The Primes Alchemist Prime Prime Master" on AMAZON
Buy "Transformers Generations Combiner Wars Legends Class Buzzsaw Figure" on AMAZON
Buy "Hasbro Transformers: The Last Knight Premier Edition Deluxe Cogman" on AMAZON